Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-392-2 | CAS number: -
Auto flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- auto-ignition temperature (liquids)
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2012-10-01 to 2012-12-06
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
- Deviations:
- no
- Principles of method if other than guideline:
- Atmospheric pressure was not recorded during the study due to instrumental malfunction. The value was corrected using the highest and lowest historical atmospheric pressures (95.79 and 103.93 kPa).
- GLP compliance:
- yes
- Auto-ignition temperature:
- 350 °C
- Atm. press.:
- 103.93 kPa
- Remarks on result:
- other: The value was corrected using the highest and lowest historical atmospheric pressures (95.79 and 103.93 kPa).
- Conclusions:
- The test material has an auto-ignition temperature of 350±5 °C
- Executive summary:
Test Guidance
EC Method A15
Method and materials
The test flask was heated in a flask heater. Aliquots of test item were dropped intothe flask, which was observed for signs of ignotion over a 300 second period. This procedure was repeated varying sample size, as neccessary, until the lowest temperature at which ignition, if any, occurred wuthin 300 seconds of insertion, was determined.
Atmospheric pressure was not recorded during the study due to instrumental malfunction. The value was corrected using the highest and lowest historical atmospheric pressures (95.79 and 103.93 kPa).
Result
The test material has an auto-ignition temperature of 350±5 °C
- Endpoint:
- relative self-ignition temperature (solids)
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2012-10-01 to 2012-12-06
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The study was performed according to EC guidelines
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.16 (Relative Self-Ignition Temperature for Solids)
- Deviations:
- no
- GLP compliance:
- yes
- Relative self-ignition temperature:
- > 58 °C
- Remarks on result:
- other:
- Remarks:
- at atm. press. of 103.93 kPa
- Conclusions:
- The test material does not have a relative self-ignition temperature below its melting temperature.
- Executive summary:
Test Guidance
EC Method A16
Method and materials
The test flask was heated in a fine mesh stainless steel cube in the middle of an oven. The oven temperature was programmed to increase from ambient to 68°C (10°C above the melting temperature) at a rate of 0.5°C/min. The temperature.time curves relating to the centre of the sample were recorded.
Result
The test material does not have a relative self-ignition temperature below its melting temperature.
Referenceopen allclose all
See the attached document for the table of results.
Description of key information
Liquid: The test material has an auto-ignition temperature of 350 ± 5 °C
Solid: The test material does not have a relative self-ignition temperature below its melting temperature.
Key value for chemical safety assessment
- Autoflammability / Self-ignition temperature at 101 325 Pa:
- 350 °C
Additional information
Liquid: The test material has an auto-ignition temperature of 350 ± 5 °C
Solid: The test material does not have a relative self-ignition temperature below its melting temperature.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
