Registration Dossier

Diss Factsheets

Physical & Chemical properties

Surface tension

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
surface tension
Type of information:
experimental study
Adequacy of study:
key study
Study period:
08/12/2008 - 08/04/2009
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: GLP compliant, guideline study, experimental study, no restrictions, fully adequate for assessment
Qualifier:
according to guideline
Guideline:
OECD Guideline 115 (Surface Tension of Aqueous Solutions)
Deviations:
no
GLP compliance:
yes
Type of method:
OECD harmonised ring method
Surface tension:
71.2 mN/m
Temp.:
20 °C
Conc.:
90 other: % saturation volume
Conclusions:
The surface tension of an aqueous preparation of the test item, at 90% saturation concentration, is 71.2 mN/m, at 20 °C.
Executive summary:

The study is GLP compliant and carried out to a standard guideline, therefore the data is considered reliable. The surface tension of an aqueous preparation of the test item, at 90% saturation concentration, is 71.2 mN/m, at 20 °C.

Endpoint:
surface tension
Type of information:
experimental study
Adequacy of study:
key study
Study period:
06/06/2007 - 16/10/2007
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: GLP compliant, guideline study, available as unpublished report, no restrictions fully adequate for assessment
Qualifier:
according to guideline
Guideline:
OECD Guideline 115 (Surface Tension of Aqueous Solutions)
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method A.5 (Surface Tension)
Deviations:
no
GLP compliance:
yes
Type of method:
OECD harmonised ring method
Surface tension:
72 mN/m
Temp.:
20 °C
Conc.:
90 other: % saturation concentration

An aqeous preparation of the test item (90% saturation concentration) was tested at 20°C. The surface tension of the purified water used to make the solution was also tested for reference. The surface tension of the purified water was 72mN/m at 20°C. The test item is not surface active

Conclusions:
The surface tension of 68476-55-1 is 72mN/m. The test item is not surface active.
Executive summary:

This study was conducted to a standard guideline and according to GLP and so is considered fully reliable for use as a key study. The surface tension of 68476-55-1 is 72mN/m. The test item is not surface active.

Endpoint:
surface tension
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: GLP compliant,guideline study, available as unpublished report, no restrictions fully adequate for assessment
Qualifier:
according to guideline
Guideline:
OECD Guideline 115 (Surface Tension of Aqueous Solutions)
Deviations:
no
GLP compliance:
yes
Type of method:
OECD harmonised ring method
Surface tension:
71.7 mN/m
Temp.:
20 °C
Conc.:
90 other: % saturation concentration

An aqeous preparation of the test item (90% saturation concentration) was tested at 20°C. The surface tension of the purified water used to make the solution was also tested for reference. The surface tension of the purified water was 71.7mN/m at 20°C. The test item is not surface active

Conclusions:
The surface tension of 92128-65-9 is 71.7mN/m. The test item is not surface active.
Executive summary:

This study was conducted to a standard guideline and according to GLP and so is considered fully reliable for use as a key study. The surface tension of 92128-65-9 is 71.7mN/m. The test item is not surface active.

Description of key information

The surface tension of streams in this category is 71.2-72 mN/m, indicating that these streams are not surface active.

Key value for chemical safety assessment

Surface tension:
71.6
in mN/m at 20°C and concentration in mg/L:
198

Additional information

Data from GKA competence centre analytics (2008, 2008 & 2009) are available for three of the streams in this category (64742 -49 -0: 71.2 mN/m, 92128-65-9: 71.7 mN/m, 68476-55-1: 72.0 mN/m, all values measured at 90 % solution saturation and at 20°C). These data will be read across to all category members.

The mean of the surface tension values for the category is 71.6 mN/m at 20°C and this has been used to complete the 'key value for chemical safety assessment'. These values were given for a concentration of 90% saturation concentration and the 90% value has been applied to the mean water solubility in order to provide a concentration in mg/L.