Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 266-936-9 | CAS number: 67701-12-6 This substance is identified by SDA Substance Name: C14-C18 and C16-C18 unsaturated alkyl carboxylic acid zinc salt and SDA Reporting Number: 04-006-09.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Uses by professional workers
Documentsopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: SU 22: Public Domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in textile industry
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of the substance in textile industry
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- Professional use of the substance in textile industry
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- Handling and transfer of liquids
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Construction chemicals
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Construction chemicals
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use not assessed
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in adhesives
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing in semi-closed process
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Adhesives
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Adhesives
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: Public Domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use not assessed
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in construction industry
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of the substance in construction industry
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- Professional use of the substance in construction industry
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing (closed process)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Professional use of the substance in textile industry
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of the substance in textile industry
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling and transfer of liquids
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in pens, pencils, markers, modelling clay industry
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of the substance in pens, pencils, markers, modelling clay industry
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing in semi-closed process
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Final handling of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 18: Ink and toners
- PC 0: Other: artists supply and hobby preparations
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in cleaning and maintenance products
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Pens, pencils, markers, modelling clay
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Pens, pencils, markers, modelling clay
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use not assessed
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of the substance in cosmetics
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing (manual process)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Professional use of the substance in construction industry
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of the substance in construction industry
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing (closed process)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Coatings and inks
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Coatings and inks
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: Formulation [mixing] of preparations and/or re-packaging
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use not assessed
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Reference substance:
- Fatty acids, C14-18 and C16-18-unsatd., zinc salts
- Name of activity / technique:
- Professional use of inks and coatings containing the substance
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional use of inks and coatings containing the substance
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- Handling and transfer of the substance in liquid forms
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling and transfer of the solid substance
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing (open process)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
