Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 204-589-7 | CAS number: 122-99-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Manufacture, use & exposure
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 ( Industrial Manufacturing)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in Production of Chemicals
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use in Production of Chemicals
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- site specific biological STP
- Application of site specific biological STP sludge on agricultural soil:
- no
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in coatings (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1 - Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2 - Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3 - Use in closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4 - Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 5 - Mixing or blending in batch processes (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 7 - Industrial sparaying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8a - Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- PROC 8b - Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 10 - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13 - Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- PROC 15 - Use of laboratory reagents in small scale laboratories
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Uses in coatings (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Use of laboratory reagents in small scale laboratories
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- IFRA GES 3 – Industrial end use of washing and cleaning products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1 - Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2 - Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4 (indoor) - Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 4 (outdoor) - Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 7 (indoor) - industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 7 (outdoor) - industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8b (indoor) - Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 8b (outdoor) - Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 10 (indoor) - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 10 (outdoor) - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13 - Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial manufacturing
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 17: Lubrication at high energy conditions in metal working operations
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Regulatory status:
- use in Scientific Research and Development
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial Use (Environment)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Industrial Use (Worker)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- SU 20: Health services
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Lubricants (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Lubricants (industrial)
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 0-1 Other activities related to manufacure of chemical products ( NACE Code to be used only )
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.6a.v1 - Lubricants: Industrial (SU3)
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.6a.v1 - Lubricants: Industrial (SU3)
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.6a.v1 - Lubricants: Industrial (SU3)
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
Other conditions of use
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of paper towels/wet wipes
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 2 - Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 10 - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of intermediate
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workers
- Name of activity / technique:
- Use of laboratory reagents in small scale laboratories
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- dermal
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- inhalation (internal) short-term exposure
- Type of exposure:
- inhalation (external) long-term exposure
- Type of exposure:
- inhalation (external) short-term exposure
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) short-term exposure
- Type of exposure:
- dermal (external) long-term exposure
- Type of exposure:
- dermal (external) short-term exposure
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Use in Cleaning Agents (professional)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 22 Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC8a Wide dispersive indoor use of processing aids in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8a Wide dispersive indoor use of processing aids in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8a Wide dispersive indoor use of processing aids in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC8d Wide dispersive outdoor use of processing aids in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8d Wide dispersive outdoor use of processing aids in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8d Wide dispersive outdoor use of processing aids in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Other conditions of use
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Uses in coatings (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Uses in coatings (industrial)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 0-1 Other activities related to manufacure of chemical products ( NACE Code to be used only )
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.3a.v1 - Uses in Coatings: Industrial (SU3)
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.3a.v1 - Uses in Coatings: Industrial (SU3)
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 4.3a.v1 - Uses in Coatings: Industrial (SU3)
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Other conditions of use
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- SU 0: Other: SU 0-1 Other activities related to manufacure of chemical products ( NACE Code to be used only )
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC4 Industrial use of processing aids
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: No SU requireed in section 3.5 based on REACH article 10 a (iii)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Sector of end use:
- SU 0: Other: SU3
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in cleaning agents (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Lubricants (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1 - Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2 - Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3 - Use in closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4 - Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 7 (automatic spraying)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 7 (manual spraying)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8a - Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- PROC 8b - Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 9 - Transfer of chemicals into small containers (dedicated filling line)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- PROC 10 - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13 - Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- PROC 17 - Lubrication at high energy conditions and in partly open process
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Lubricants (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of chemicals into small containers (dedicated filling line)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Lubrication at high energy conditions and in partly open process
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- AISE_IS_001_C1 – Industrial uses; washing, cleaning and disinfecting products
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Automated task; Semi-automated task; Dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying; Automated task; Open system
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Brushing; Automated task
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 17: Lubrication at high energy conditions in metal working operations
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Functional Fluids (industrial)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
- Name of activity / technique:
- Functional Fluids (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Functional Fluids (industrial)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- SU 0: Other: SU 0-1 Other activities related to manufacure of chemical products ( NACE Code to be used only )
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 7.13a.v1 - Functional Fluids: Industrial (SU3)
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 7.13a.v1 - Functional Fluids: Industrial (SU3)
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 7.13a.v1 - Functional Fluids: Industrial (SU3)
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- ESVOC SpERC 1.1.v1 - Manufacture of substances: Industrial (SU8, SU9)
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use as intermediate to synthesise polymers
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation) with occasionnal controlled exposure
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production where opportunity for exposure arises (liquid).
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from dedicated facilities /to vessels/large (IBC, Drum)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or preparation into small containers (dedicated filling line, including weighing).
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Use as laboratory reagent (quality control)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: PC 19 intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in cleaning agents
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1 - Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2 - Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3 - Use in closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4 - Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 7 - Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8a - Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- PROC 8b - Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 10 - Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13 - Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Functional Fluids (industrial)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
- Name of activity / technique:
- Functional Fluids (industrial)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at non dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of chemicals into small containers (dedicated filling line)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring