Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 293-671-6 | CAS number: 91081-64-0 Slag produced during ilmenite smelting (ore or sand). Consists primarly of TiO2, FeO, Al2O3, SiO2, MgO and other metal oxides.
Density
Administrative data
Link to relevant study record(s)
Description of key information
Different relative densities were measured for UGI samples, which lie in the range of 3.63 - 4.08, measured at different temperatures (range 21.5°C-24.3°C). A list of the individual density values of the different test substances is shown below:
Soreslag: 3.7 (at 22.3 °C) (OECD 109/ EU Method A.3)
UGS: 4.08 (at 23.3 °C) (OECD 109/ EU Method A.3)
RBM Sulphate Slag: 3.93 (at 21.5 °C) (OECD 109/ EU Method A.3)
RBM Chloride Slag: 3.97 (at 23.8 °C) (OECD 109/ EU Method A.3)
Tinfos 77 % TiO2 Slag: 3.63 (at 24.3 °C) (OECD 109/ EU Method A.3)
Namakwa Sulphate Grade Titania Slag: 3.91 ( at 21.5 °C) (OECD 109/ EU Method A.3)
Namakwa Chloride Grade Slag: 3.97 (at 23.8 °C) (OECD 109/ EU Method A.3)
TiCor Marketing Chloride Slag: 3.99 (at 22.5 °C) (OECD 109/ EU Method A.3)
Key value for chemical safety assessment
Additional information
Different relative densities were measured for UGI samples, which lie in the range of 3.63 - 4.08, measured at different temperatures (range 21.5°C-24.3°C).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
