Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Toxicological information

Skin sensitisation

Currently viewing:

Administrative data

Endpoint:
skin sensitisation: in vivo (non-LLNA)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
1992-09-15 to 1992-10-24
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Remarks:
According to the study report, this GLP study was conducted according to the OECD TG 406 “Skin sensitisation", adopted 12 May 1981. The guinea-pig maximisation test according to Magnusson and Kligman was used. There are no deviations from the applicable 1981 version of OECD TG 406, and the study is well reported. Therefore, it is considered as RL=1 "Reliable without restrictions".”

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
1996
Report date:
1996

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
OECD Guideline 406 (Skin Sensitisation)
Version / remarks:
adopted 12 May 1981
Deviations:
yes
Remarks:
Minor deviations, see "rationale for reliability"
GLP compliance:
yes
Remarks:
The study report states that the study was conducted in compliance with Good Laboratory Practice Standards, e.g. by the United Kingdom Compliance Programme, Department of Health & Social Security 1986 and subsequent revision, Department of Health, 1989.
Type of study:
guinea pig maximisation test
Justification for non-LLNA method:
The conduct of this study was prior to the establishment of the LLNA method (OECD 429).

Test material

Constituent 1
Chemical structure
Reference substance name:
Molybdenum trioxide
EC Number:
215-204-7
EC Name:
Molybdenum trioxide
Cas Number:
1313-27-5
Molecular formula:
MoO3
IUPAC Name:
trioxomolybdenum
Details on test material:
- Name of test material (as cited in study report): Molybdenum oxide (pure)
- Physical state: white crystalline powder
- Analytical purity: MoO3 = 90%; Mo= 57%
- Storage condition of test material: Room temperature

No further significant information on test material was stated.

In vivo test system

Test animals

Species:
guinea pig
Strain:
Dunkin-Hartley
Sex:
female
Details on test animals and environmental conditions:
TEST ANIMALS
- Age at study initiation: approximately six to seven weeks
- Weight at study initiation: weight range of 276 to 340 g on arrival
- Housing: The guinea pigs were housed in groups of ten in suspended metal cages with wire mesh floors.
- Diet: A vitamin C enriched guinea-pig diet FD1 (ad libitum); Hay was given weekly.
- Water (ad libitum): drinking water
- Acclimation period: nineteen days prior to allocation to the main study


ENVIRONMENTAL CONDITIONS
- Temperature: approximately 21 °C
- Relative humidity: 30 - 70 %
- Air exchanges: approximately 15 air changes per hour
- Photoperiod (hrs dark / hrs light): 12 h/ 12h

No further significant information was stated.

Study design: in vivo (non-LLNA)

Inductionopen allclose all
Route:
intradermal and epicutaneous
Vehicle:
other: Alembicol D (a product of coconut oil)
Concentration / amount:
The following concentrations are based on a range finding test.
Induction intradermal injections - test animals (main study)
1. Freund's complete adjuvant was diluted with an equal volume of water for irrigation (Ph.Eur.)
2. Molybdenum oxide (pure), 7.5 % w/w in Alembicol D
3. Molybdenum oxide (pure), 7.5 % w/w in a 50:50 mixture of Freund's complete adjuvant and Alembicol D
Induction topical application - test animals (main study)
Molybdenum oxide (pure), 70 % w/w in Alembicol D

Challenge - control and test animals (main study)
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol

Challengeopen allclose all
Route:
epicutaneous, occlusive
Vehicle:
other: Alembicol D (a product of coconut oil)
Concentration / amount:
The following concentrations are based on a range finding test.
Induction intradermal injections - test animals (main study)
1. Freund's complete adjuvant was diluted with an equal volume of water for irrigation (Ph.Eur.)
2. Molybdenum oxide (pure), 7.5 % w/w in Alembicol D
3. Molybdenum oxide (pure), 7.5 % w/w in a 50:50 mixture of Freund's complete adjuvant and Alembicol D
Induction topical application - test animals (main study)
Molybdenum oxide (pure), 70 % w/w in Alembicol D

Challenge - control and test animals (main study)
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol

No. of animals per dose:
Preliminary study: 4 animals
Main study: 20 test animals
Details on study design:
MAIN STUDY
A. INDUCTION EXPOSURE
- No. of exposures: 2 (intradermal injections & topical application)
- Exposure period: topical application: 48 hours
- Test groups: Intradermal injections: Freund's complete adjuvant was diluted with an equal volume of water for irrigation (Ph.Eur.); Molybdenum oxide (pure) in Alembicol; Molybdenum oxide (pure) in a 50:50 mixture of Freund's complete adjuvant and Alembicol D. A volume of 0.1 ml was injected.
Topical application: Approximately 0.4 ml of Molybdenum oxide (pure), 70 % w/w in Alembicol D
- Control group: During the induction phase, the control animals were treated similarly to the test animals with the exception that the test substance was omitted from the intradermal injections and topical application.
- Site: A 40 x 60 mm area of dorsal skin on the scapular region of the guinea-pig was clipped free of hair with electric clippers. Three pairs of intradermal injections were made into a 2 x 4 cm area within the clipped area. The same 40 x 60 mm intrascapular area was clipped and shaved for the topical application.
- Frequency of applications: The intradermal injections were given once and 7 days later the topical application was carried out.


B. CHALLENGE EXPOSURE
- No. of exposures: 1
- Day(s) of challenge: Day 21
- Exposure period: 24 hours
- Site (control and test group): Hair was removed by clipping and then shaving from an area on the left flank. A 20 x 20 mm patch of Whatman No. 3 paper was saturated with approximately 0.2 ml of Molybdenum oxide (pure), 70 % w/w in Alembicol D and applied to an anterior site on the flank. Molybdenum oxide (pure), 35 % w/w in Alembicol D was applied in a similar manner to a posterior site.
- Evaluation (hr after challenge): The challenge sites were evaluated 24, 48 and 72 hours after removal of the patches.

GRADING SYSTEM for evaluating dermal reactions:

Erythema and eschar formation:
No erythema = 0
Slight erythema = 1
Well-defined erythema = 2
Moderate erythema = 3
Severe erythema (beet redness) to slight eschar formation (injuries in depth) = 4

Oedema formation:
No oedema = 0
Slight oedema = 1
Well-defined oedema (edges of area well-defined by definite raising) = 2
Moderate oedema (raised approximately 1 millimetre) = 3
Severe oedema (raised more than 1 millimetre and extending beyond the area of exposure) = 4

Any other lesion not covered by this scoring system was described.

No further significant information on study design were stated.
Challenge controls:
20 females; The control animals were challenged topically two weeks after the topical induction application using Molybdenum oxide (pure), 70 and 35% w/w in Alembicol D.
Positive control substance(s):
yes
Remarks:
formalin

Results and discussion

Positive control results:
10 females were tested with formalin and 10 females served as a control. All females treated with formalin showed a positive response.

In vivo (non-LLNA)

Resultsopen allclose all
Key result
Reading:
1st reading
Hours after challenge:
24
Group:
negative control
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: 1st reading. . Hours after challenge: 24.0. Group: negative control. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
2nd reading
Hours after challenge:
48
Group:
negative control
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: 2nd reading. . Hours after challenge: 48.0. Group: negative control. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
other: 3rd reading
Hours after challenge:
72
Group:
negative control
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: other: 3rd reading. . Hours after challenge: 72.0. Group: negative control. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
1st reading
Hours after challenge:
24
Group:
test chemical
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: 1st reading. . Hours after challenge: 24.0. Group: test group. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
2nd reading
Hours after challenge:
48
Group:
test chemical
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: 2nd reading. . Hours after challenge: 48.0. Group: test group. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
other: 3rd reading
Hours after challenge:
72
Group:
test chemical
Dose level:
Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol
No. with + reactions:
0
Total no. in group:
20
Clinical observations:
None were found. No dermal responses were seen in any of the test or control animals.
Remarks on result:
other: see Remark
Remarks:
Reading: other: 3rd reading. . Hours after challenge: 72.0. Group: test group. Dose level: Molybdenum oxide (pure), 70 and 35 % w/w in Alembicol. No with. + reactions: 0.0. Total no. in groups: 20.0. Clinical observations: None were found. No dermal responses were seen in any of the test or control animals..
Key result
Reading:
other: no positive control included
Group:
positive control
Dose level:
0
No. with + reactions:
0
Total no. in group:
0

Applicant's summary and conclusion

Interpretation of results:
not sensitising
Remarks:
Migrated information
Conclusions:
In this test, performed in twenty albino guinea-pigs Molybdenum oxide (pure) did not produce evidence of skin sensitisation (delayed contact hypersensitivity) in any of the animals.