Registration Dossier

Administrative data

First-aid measures

General information:
-
After inhalation:
Provide fresh air. In cases of sickness seek medical advice (show label or SDS if possible).
After contact with the skin:
Wash with plenty of water or water and soap. Seek medical advice in case of continuous irritation. Remove contaminated or soaked clothing.
After contact with the eyes:
Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.
After swallowing:
Drink plenty of water in small portions and induce vomiting. In cases of sickness seek medical advice (show label if possible).

Fire-fighting measures

Suitable extinguishing media:
water spray, extinguishing powder, foam, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
water jet .
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases:
At low oxygen level: organic decomposition products.
Special protective equipment for fire fighting:
Use respiratory protection independent of recirculated air.

Accidental release measures

Personal precautions:
Wear personal protection equipment (see section 8). Avoid sources of ignition.
Environmental precautions:
Prevent material from entering sewers or surface waters. Contain any fluid that runs out using suitable material (e.g. earth).
Observe local/state/federal regulations.
Methods for cleaning up:
Absorb with a liquid binding material such as diatomaceous earth and dispose of according to local/state/federal regulations.
Contain larger amounts and pump up into suitable containers.

Handling and storage

Handling:
Precautions for safe handling:
Do not mix with alkalis, strong acids, oxidizing agents.
Precautions against fire and explosion:
No special precautions against fire and explosion required.
Storage:
Conditions for storage rooms and vessels:
Protect against light.
Advice for storage of incompatible materials:
Do not store together with oxidizing agents like peroxides etc.
Further information for storage:
Keep in the original container in a cool well ventilated place. Keep container dry and tightly closed.
Minimum temperature allowed during storage and transportation: 10 °C
Maximum temperature allowed during storage and transportation: 40 °C

Transport information

Land transport (ADR/RID)

UN number:
Not regulated for transport
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated for transport
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated for transport
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limits:
Maximum airborne concentrations at the workplace:
not applicable
-
Exposure limited and controlled:
Exposure in the work place limited and controlled:
General protection and hygiene measures:
Observe standard industrial hygiene practices for the handling of chemical substances. Avoid contact with eyes and skin.
Personal protection equipment:
Respiratory protection:
not required .
Hand protection:
Protective gloves made of butyl rubber . Wear gloves for short periods only < 10 mins.
Eye protection:
tight fitting protective goggles .
Skin protection:
protective clothing, protective goggles/face protection
Exposure to the environment limited and controlled:
Prevent material from entering surface waters and soil.

Stability and reactivity

General information:
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
Conditions to avoid:
Possibility of spontaneous polymerization of unstabilized product by ambient temperature. Ensure adequate stabilisation.
Materials to avoid:
Reacts with: basic substances and peroxides. Reaction causes the formation of: heat. Possibility of polymerisation.
Hazardous decomposition products:
If stored and handled in accordance with standard industrial practices and local regulations where applicable: none known.
By hydrolysis: acetaldehyde .

Disposal considerations

Material:
Recommendation:
Dispose of according to regulations by incineration in a special waste incinerator. Observe local/state/federal regulations.
Uncleaned packaging:
Recommendation:
Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used.
Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.