Registration Dossier

Administrative data

First-aid measures

INHALATION: If inhaled, remove to fresh air and allow the victim to rest in a well ventilated area. If breathing is stopped, trained personnel should begin artificial respiration (use protective mask with one way valve), or if the heart is stopped, cardiopulmonary resuscitation (CNR) immediately. Seek medical attention.
CONTACT WITH THE SKIN: Remove contaminated clothing, taking care not to spread the chemical. Flush the contact area with lukewarm running water and soap for at least 15 minutes. Seek medical attention if irritation persists.
CONTACT WITH THE EYES: Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Always seek medical attention for accidents involving the eyes.
INGESTION: Rinse mouth thoroughly with water. Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Seek medical attention if symptoms appear.

Fire-fighting measures

EXTINGUISHING MEDIA: Water spray, dry chemical powder, carbon dioxide or appropriate foams.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE: The thermal decomposition and ignition of the product can produce toxic fumes COx, NOx, Ammonia and diethylamina.

Accidental release measures

Wear protective clothing, protective glasses, rubber boots and heavy-duty rubber gloves.
Wear an independent respirator. Evacuate the area and aerate the zone contaminated by the spilt product after cleaning it away completely.
Avoid forming clouds of dust/powder.

Handling and storage

The substance is only used in a synthesis process to produce an Active Pharmaceutical Ingredient (A.P.I.).
See section 13 for Information on details of the risk management measures applied at the manufacturing site and recommended to the user in order to achieve strictly controlled conditions.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EYE/ FACE PROTECTION Wear protective glasses (EN 166) during the execution of any industrial type of operations. If necessary, wear a protective face shield.
SKIN PROTECTION Use work overalls and/or coat, or dustproof overalls in Tyvek with hood for industrial type operations.
Wear Nitrile or rubber gloves (neoprene). Minimum thickness of gloves: 1.2 mm.
RESPIRATORY PROTECTION Use and selection of respiratory protection is based upon engineering controls in use and potential for aerosol generation. When engineering controls are not sufficient control exposure, wear an approved respirator with NIOSH Class 100 or high efficiency particulate (HEPA) filters or cartridges (EN 140/EN 136) when exposures are up to 10 times the exposure control guideline. Wear a loose-fitting (Tyvek or helmet type)
HEPA powered-air purifying respirator (PAPR) (EN 12941) when exposures are 10-25 times the exposure control guideline. Wear a full facepiece negative pressure respirator with Class 100 or HEPA filters (EN 136) when exposures are 25-50 times the exposure control guideline. Wear a tight fitting, full facepiece HEPA PAPR (EN 12942) when exposures are 50-100 times the exposure control guideline. Wear a hood-shroud HEPA PAPR (EN 12941) or full facepiece supplied air respirator (EN 139) operated in a pressure demand or other positive pressure mode when exposures are 100-1000 times the exposure control guideline.

Avoid dispersion in the environment.

Stability and reactivity

Stable under ordinary conditions of use and storage.
Avoid exposure to light and Strong oxidizing agents.

Disposal considerations

Dispose according national regulation.