Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 248-702-8 | CAS number: 27870-92-4
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Experimental data
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Principles of method if other than guideline:
- The density is calculated from the difference in weight between the full and empty pycnometer and its volume
- GLP compliance:
- no
- Type of method:
- pycnometer method
- Key result
- Type:
- density
- Density:
- 0.55 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- The mean density of 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No. 27870-92-4) is was found to be 0.5500 g/cm³ at 20 °C and 966.6 hPa
- Executive summary:
The density of test item 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No. 27870-92-4)was determined following OECD Guideline 109 and according to the method adapted from ASTM D854-02 using glass pyknometer. The mean density of test item is was found to be 0.5500 g/cm³ at 20 °C and 966.6 hPa
Reference
Description of key information
The density of test item 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No. 27870-92-4)was determined following OECD Guideline 109 and according to the method adapted from ASTM D854-02 using glass pyknometer. The mean density of test item is was found to be 0.5500 g/cm³ at 20 °C and 966.6 hPa
Key value for chemical safety assessment
- Relative density at 20C:
- 0.55
Additional information
The density of test item 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No. 27870-92-4)was determined following OECD Guideline 109 and according to the method adapted from ASTM D854-02 using glass pyknometer. The mean density of test item is was found to be 0.5500 g/cm³ at 20 °C and 966.6 hPa.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
