2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione

Skin irritation / corrosion

Administrative data

Endpoint:

skin irritation: in vitro / ex vivo

Type of information:

experimental study

Adequacy of study:

key study

Study period:

May 05, 2017 to July 17, 2017

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Justification for type of information:

Data is from experimental study report

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2017

Report date:

2017

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)

Principles of method if other than guideline:

The purpose of this study was to assess potential for the test articles to be dermal irritants. The dermal irritation potential of test article 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No.- 27870-92-4) may be predicted by measurement of their cytotoxic effect, as reflected in the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, in the MatTek EpiDerm™ model (MatTek Corp., Ashland, MA).

GLP compliance:

yes

Test material

Test material information

Constituent 1

Reference substance name:

2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione

EC Number:

248-702-8

EC Name:

2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione

Cas Number:

27870-92-4

Molecular formula:

C36H45NO2S

IUPAC Name:

14-octadecyl-8-thia-14-azapentacyclo[10.6.2.0²,⁷.0⁹,¹⁹.0¹⁶,²⁰]icosa-1(19),2,4,6,9,11,16(20),17-octaene-13,15-dione

Test material form:

solid: particulate/powder

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Test material identity: 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (Neeliglow. Solvent Yellow 98)
- Source: Neelikon Food Dyes & Chemicals Ltd.
- Lot No.of test material: FG/16-17/0289
- Date of manufacture: 27/04/2016
- Expiration date of the lot/batch: April 27, 2026
- Purity: Not provided
- Melting point: 108 degC (minimum)
- Melting point: 110 degC (maximum)
- Absorbance for 5 ppm solution in Dimethyl Formamide: 0.189 A°
- Wavelength maxima in DMF: 457 nm

RADIOLABELLING INFORMATION (Not applicable)
- Radiochemical purity: N/A
- Specific activity: N/A
- Locations of the label: N/A
- Expiration date of radiochemical substance: N/A

STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Room temperature
- Stability under test conditions: No data available
- Solubility and stability of the test substance in the solvent/vehicle: No data available
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: No data available

TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: Test articles is tested as provided (neat).
- Preliminary purification step (if any): No data available
- Final dilution of a dissolved solid, stock liquid or gel: No data available
- Final preparation of a solid: No data available

FORM AS APPLIED IN THE TEST (if different from that of starting material): Solid

OTHER SPECIFICS: No data available

In vitro test system

Test system:

human skin model

Source species:

human

Cell type:

non-transformed keratinocytes

Cell source:

other: EpiDerm™ 3-dimensional human tissues used in this study

Source strain:

other: Not applicable

Details on animal used as source of test system:

- Description of the cell system used:
The normal human-derived keratinocytes were cultured at the air-liquid interface in a chemically defined medium on a permeable polycarbonate insert (surface 0.5 cm2). They were cultured in chemically defined serum free medium to form a multi-layered epithelium similar to that found in native epidermis. Each lot of tissues was Quality Assured by MatTek according to specific QC standards including: histology, tissue viability (MTT mean optical density), reproducibility (SD) and tissue thickness.

- Test System Identification
All of the EpiDerm™ 3-dimensional human tissues used in this study were identified by the date of arrival and the lot number. Certificate of Analysis for the tissues are included in this report. Tissue plates were appropriately labeled with study information.

Justification for test system used:

The 3-Dimensional Human Dermal Epithelial Model (EpiDerm™, MatTek, Ashland, MA) is made up of normal human keratinocytes in serum free medium. The cells form an epithelial tissue that consists of organized basal, spinous, granular, and cornified layers analogous to those found in vivo. The EpiDerm™ model also contains epidermis-specific differentiation markers such as pro-filaggrin, the K1/K10 cytokeratin pair, involucrin, and type I epidermal transglutaminase, as well as keratohyalin granules, tonofilament bundles, desmosomes, and a multi-layered stratum corneum containing intercellular lamellar lipid layers arranged in patterns characteristic of in vivo epidermis. Each lot of tissues was Quality Assured by MatTek, Inc. according to specific QC standards including: histology (cell layers), tissue viability (MTT mean optical density) and reproducibility (SD). Tissue plates were appropriately labeled with study information. Bias was not a factor in this test system.

Vehicle:

unchanged (no vehicle)

Details on test system:

The tissues were exposed to the test article 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione neat (undiluted) on June 28, 2017 (Run 1 of 1). EpiDerm™ tissues were purchased from MatTek. Quality control of the tissues was performed by MatTek and the Certificate of Analysis (CoA) for the tissues is provided and is kept in the study binder. Tissues were exposed for approximately 1 hour, with 35 minutes in an approximately 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature. Following the exposure time, the tissues were rinsed and placed in fresh media for approximately 24 hours. The media was then changed again and the tissues were incubated in fresh media for another ~18 hours for a total of approximately 42 hour post-exposure recovery period. The tissue viability was then assessed by MTT assay. The tissue CoA was used instead of verification of barrier properties of the tissue.

MTT and Color Pre-tests
Pretesting for MTT auto-reduction and coloring was not performed for this study but was based on the results obtained from another study (CYP1690_R1b).

MTT Assay
Following the rinsing period, the MTT assay was performed by transferring the tissues to 24-well plates containing 300 µL MTT medium (1.0 mg/mL). After 2 hours, 57 minute and 25 second MTT incubation at approximately 37°C, approximately 5% CO2 in a humidified incubator, the blue formazan salt was extracted by submerging tissues in 2 mL isopropanol in a 24-well plate. The extraction time was approximately 2 hours 04 minutes and 11 seconds with gentle shaking. The optical density of the extracted formazan (200 µL/well of a 96-well plate) was determined using a Synergy H4 spectrophotometer at 570 nm. Relative cell viability is calculated for each tissue as % of the mean negative control tissues.

Evaluation of Test Article in the Cell Models:
1. Cell system:
Upon receipt, the MatTek EpiDerm™ tissue cultures were placed in 0.9 mL of fresh Maintenance medium (in a 6-well plate). The culture inserts are incubated for ~one hour. The tissues were then transferred to 6-well plates containing 0.9 mL fresh Maintenance medium and they were incubated overnight at ~37°C, 5% CO2 in a humidified incubator.

2. Control and Test Article Exposures:
On the day of dosing, the tissues are then removed from the incubator and the controls and the test articles are applied topically to tissues by pipette. Tissues were exposed to controls and the test articles for one hour, with ~35 minutes in a 37°C, 5% CO2 humidified incubator and the remaining 25 minutes at room temperature.

a) Controls
30 µL of negative control DPBS, positive control 5% SDS was applied topically to the tissue and gently spread by placing a nylon mesh on the apical surface of each tissue, if necessary.

b)Test Article
For 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione, the tissues were moistened with 25 μL of ultrapure water to improve contact of the tissue surface with the test article. Approximately 25 mg of 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione was evenly applied to the apical surface of each tissue (n=3). All the tissues were placed into the ~37°C incubator with 5% CO2. The exposure times were approximately 1 hour, with ~35 minutes exposure in the incubator and ~25 minutes at room temperature.

3.Post-exposure treatment
After the 1 hour exposure, the tissues were rinsed 20 to 25 times with 1 mL of DPBS. The apical surface was gently blotted with a cotton swab. The tissues were placed in 0.9 mL of fresh Maintenance medium (6-well plate) for either 25 hours, 38 minutes and 23 seconds or for 24 hours, 10 minutes and 09 seconds (as there were numerous tissues, they had to be broken down into 2 sets to complete dosing in a timely manner). After this initial ~24 hour incubation, the tissues were placed in 6-well plates containing 0.9 mL fresh Maintenance medium and incubated for another 17 hours, 03 minutes and 34 seconds prior to performing the MTT assay, for a total of an approximately 42 hour post-exposure incubation.

RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: The EpiDerm™ 3 dimensional human tissue model
- Tissue Lot number(s): 26459
- Date of initiation of testing: 6/08/2017

TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37°C
- Temperature of post-treatment incubation (if applicable): 37°C

REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: Twice

MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 300 µL MTT medium (1.0 mg/mL).
- Incubation time: After 2 hours, 57 minute and 25 second MTT incubation
- Spectrophotometer: Synergy H4 spectrophotometer
- Wavelength: 570 nm
- Filter: No data
- Filter bandwidth: No data
- Linear OD range of spectrophotometer: No data

NUMBER OF REPLICATE TISSUES: 3

CALCULATIONS and STATISTICAL METHODS
All data were background subtracted before analysis. MTT data are presented as % viable compared to negative control. Data were generated as follows:

MTT Assay
Blanks:
·        The optical density (OD) mean from all replicates for each plate (ODblank).

Negative Controls (NC):
·        The blank corrected value was calculated: ODNC= ODNCraw– ODblank.
·        The OD mean per NC tissue was calculated.
·        The mean OD for all tissues corresponds to 100% viability.
·        The mean, standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated.

Positive Control (PC):
·        Calculate the blank corrected value: ODPC= ODPCraw– ODblank.
·        The OD mean per PC tissue was calculated.
·        The viability per tissue was calculated: %PC = [ODPC/ mean ODNC] x 100.
·        The mean viability for all tissues was calculated: Mean PC = Σ %PC / number of tissues.
·        The standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated.

Tested compound :
·        Calculate the blank corrected value ODTT= ODTTraw– ODblank.
·        The OD mean per tissue was calculated.
·        The viability per tissue was calculated: %TT = [ODTT/ mean ODNC] x 100.
·        The mean viability for all tissues was calculated: Mean TT = Σ %TT / number of tissues.
·        The standard deviation (SD), standard error of the mean (SEM) and the percent coefficient of variation (% CV) was calculated.

Data Correction Procedure for MTT Interfering Compounds (if applicable)
True viability = Viability of treated tissue – Interference from test article = ODtvt– ODktwhere ODkt= (mean ODtkt– mean ODukt).
ODtvt= optical density of treated viable tissue
ODkt= optical density of killed tissues
ODtkt= optical density of treated killed tissue
ODukt= optical density of untreated killed tissue (NC treated tissue)

Data Correction Procedure for Colored Compounds (if applicable)
True viability = Viability of treated tissue incubated in MTT media – Viability of treated tissue incubated in media without MTT = ODtvt– ODvt.
ODtvt= optical density of treated viable tissue incubated in MTT media
ODvt= optical density of viable tissues incubated in media alone

- Evaluation of data
The results of the assay was evaluated and compared to negative control.  
Table: Criteria for in vitro Interpretation:
In VitroResults In VivoPrediction
Mean tissue viability ≤50% Irritant (I), R38
Mean tissue viability >50% Non-irritant (NI)

- Assay quality controls
- Negative Controls (NC)
The Dulbecco’s phosphate buffered saline (DPBS) was used as a NC. The assay passed all acceptance criteria if the ODs of the negative control exposed tissues were between ≥0.8 and ≤2.8.
 
- Positive Controls (PC)
5% solution of sodium dodecyl sulfate was used as a PC. The assay is meeting the acceptance criteria if the viability of the PC is ≤20% of the negative control.
 
- Standard Deviation (SD)
The standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was ≤18.

Control samples:

yes, concurrent negative control

yes, concurrent positive control

Amount/concentration applied:

TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 25 mg
- Concentration (if solution): neat (undiluted)

VEHICLE (Not used)
- Amount(s) applied (volume or weight with unit): none
- Concentration (if solution): none
- Lot/batch no. (if required): none
- Purity: none

NEGATIVE CONTROL
- Amount(s) applied (volume or weight): 30 µL
- Concentration (if solution): neat

POSITIVE CONTROL
- Amount(s) applied (volume or weight): 30 µL
- Concentration (if solution): 5% solution of sodium dodecyl sulfate

Duration of treatment / exposure:

The exposure times were approximately 1 hour, with ~35 minutes exposure in the incubator and ~25 minutes at room temperature.

Duration of post-treatment incubation (if applicable):

For a total of an approximately 42 hour post-exposure incubation.

Number of replicates:

3 tissues were used for test compound and control.

Results and discussion

In vitro

Results

Irritation / corrosion parameter:

% tissue viability

Run / experiment:

Run 1

Value:

103.5

Vehicle controls validity:

not specified

Negative controls validity:

valid

Positive controls validity:

valid

Remarks on result:

no indication of irritation

Other effects / acceptance of results:

The MTT data show the assay quality controls were met, as the OD of the negative control tissues was between 1.195 and 1.430. Also, the positive control, 5% sodium dodecyl sulfate (SDS), reduced tissue viability to 4.5% of negative control and the standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was 2.9 passing the acceptance criteria.

Applicant's summary and conclusion

Interpretation of results:

other: not irritating

Conclusions:

The dermal irritation potential of test article 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No.- 27870-92-4) was determined according to the OECD 439 test guideline followed for this study. The Mean % tissue viability compared to negative control (n=3) of the test subst ance 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione was determined to be 103.5 %. Thus, 2-octadecyl-1H-thioxantheno [2,1, 9-def]isoquinoline-1,3(2H)-dione (CAS No.- 27870-92-4) was considered to be not irritating to the skin of humans.

Executive summary:

The dermal irritation potential of test article 2-octadecyl-1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No.- 27870-92-4) was determined according to the OECD 439 test guideline followed for this study. The MatTek EpiDerm™ model was used to assess the potential dermal irritation of the test article by determining the viability of the tissues following exposure to the test article via MTT. The objective of this study was to assess the dermal irritation potential of test article. Tissues were exposed to test article and controls for ~one hour, followed by a 42 hour post-exposure recovery period. The viability of each tissue was determined by MTT assay.   

The MTT data show the assay quality controls were met, as the OD of the negative control tissues was between 1.195 and 1.430. Also, the positive control, 5% sodium dodecyl sulfate (SDS), reduced tissue viability to 4.5% of negative control and the standard deviation (SD) calculated from individual percent tissue viabilities of the test article exposed replicates was 2.9 passing the acceptance criteria.

 

The Mean % tissue viability compared to negative control (n=3) of the test substance 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione was determined to be 103.5 %.

 

Hence, under the experimental test conditions it was concluded that test substance 2-octadecyl -1H-thioxantheno[2,1,9-def]isoquinoline-1,3(2H)-dione (CAS No.- 27870-92-4) was considered to be not irritating to the human skin and being classified as “Not Classified'' as per CLP Regulation.