Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: -
CAS number: -
Emergency measure - Inhalation: Move exposed person to fresh air. Symptomatic treatment. In
case of indisposition seek medical advice.
Emergency measure - Eyes: Rinse with plenty of water. If irritation occurs, seek
Emergency measure - Skin: Wash with soap and water.
Emergency measure - Ingestion: Symptomatic treatment. In case of indisposition seek
Recommended extinguishing agent: Water, dry powder, foam and carbon dioxide may be used.
Product arising from burning: COx, NOx, SO2 and other toxic gases.
Product determined by test: N
Protective equipment: A self-contained breathing apparatus should be worn.
Emergency measures in case of spillage: Wear suitable protective clothing (see 2.3.00). Sweep up
(wet powders with water), for liquids absorb using a
suitable absorbent material (eg. kieselguhr, sand, saw dust
etc). Transfer to labelled containers and dispose of by
incineration in accordance with local regulations. Wash
spill site with water. Prevent release to water courses.
Handling: Ensure adequate ventilation. Observe the usual precautions
for handling chemicals. If the substance is handled as
powder, avoid inhalation and contact with skin and eyes.
Wear suitable protective gloves, safety goggles and a dust
mask. Use equipment for handling powders or other
appropriate egineering controls.
Storage: The substance should be stored in well sealed and secure
containers in adequate rooms at room temperature. Avoid dust
residue outside the containers.
Packaging of the substance and or preparation: Polyethylene-drum in sealed cardboard-package.
-. Hygiene measures:
Avoid ingestion, inhalation, skin and eye contact. Handle in accordance with good industrial hygiene practice and any legal requirements.Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
-. Eye/face protection:
Safety eyewear complying with an approved standard should be used to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: tightly fitting safety goggles.
-. Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Use gloves approved to relevant standards e.g. EN 374 (Europe), F739 (US). Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove material and dexterity. Always seek advice from glove suppliers.
-. Skin protection:
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Respiratory protection by enhanced general ventilation (5-10 air changes per hour). Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
-.Environmental exposure controls:
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Danger other than fire: None known.
Chemical reaction with water: None known.
Dust explosion: Not to be expected if handled under good industrial hygiene
Dust explosion determined by test: N
Industry - Possibility of recovery/recycling: Normal application results in the consumption of approx.
95% by irreversible binding to the polyester fibres.
Recovery for recycling of the remaining substance is not
Industry - Possibility of neutralisation: No suitable method known.
Industry - Possibility of destruction: controlled discharge: Not suitable for deposit in landfill site.
Industry - Possibility of destruction - incineration: Code 661: Incinerator with flue gas scrubbing.
Industry - Possibility of destruction - water purification: Code 641: Removal by controllled discharge to a waste water
treatment plant. It is estimated that 5% of the total
quantity used is discharged into internal industrial
effluents a highly diluted solution. A purification of the
waste water in a waste water treatment plant is
recommended. The dyestuff should be used in a well equiped
dye house. If necessary, the waster water can be purified
prior to the waste water treatment by membrane filtration
or by floculation with cationic agents or by treatment with
ozone. The most effective method is the membrane
filtration: more than 98% of the remaining dyestuff can be
removed from the waste water.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again