Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:- following inhalation Remove to fresh air. If breathing stops, provide artifical respiration. Get medical attention immediately.- following skin contact Wash off immediately with plenty of water. Continue to rinse for at least 15 minutes. Immdiately take of all contaminated clothing. Get medical attention if irritation develops and persists. - following eye contact In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under eye lids, for at least 15 minutes. Get medical attention. - following ingestion immediately give large quantities of water to drink. Never give anything by mouth to a victim who is unconscious or is having convulsions. Call a physician or poison control centre immediately. Most important symptoms and effects, both acute and delayed:- Based on accidential exposure in an occupational setting the substance is a lachrymator and may cause an allergic skin reaction. Substance may also cause eye irritation and skin corrosion

Fire-fighting measures

Suitable extinduishing media - Carbon dioxide, dry chemical or waterUnsuitable extinguishing media - None knownSpecial hazards arising from the substance - Dust may form explosive mixture with air. Hazardous decomposition products formed under fire conditionsSpecial protective equipement for firefighters - Wear self-contained breathing apparatus and protective clothingSpecial fire fighting procedures - Not available

Accidental release measures

Personal precautions, protective equipment and emergency procedures - Wear suitable protective clothing, gloves and eye/face protection. See Exposure Controls/Personal Protection information that follows belowEnvironmental precautions - Avoid discharge into drains, water courses or onto the groundMethods and material for containment and cleaning up - Do not sweep. Collect spill using a vacuum cleaner with a HEPA filter. Be aware of potential for dust explosion when using electrial equipment. If vacuum is not available, lightly mist/wet material and remove by mopping of wet wiping

Handling and storage

Precautions for safe handling - Avoid contact with eyes, skin and clothing. Wash hands thoroughly after handling. See Exposure Controls/Personal Protection information that followsConditions for safe storage, including any incompatibilities - Keep container tightly closed in a dry and well ventilated place

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
3261
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S
Chemical name:
2,4-Dichloro-5-fluoropyrimidine
Language:
English
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
3261
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S
Chemical name:
2,4-Dichloro-5-fluoropyrimidine
Language:
English
Labels:
8
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
3261
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S
Chemical name:
2,4-Dichloro-5-fluoropyrimidine
Labels:
8
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
3261
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S
Chemical name:
2,4-Dichloro-5-fluoropyrimidine
Labels:
Corrosive
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

12 hour internal company OEL: 70 micrograms/m3 (12 hour TWA) Appropriate Engineering controls - Open handling is not recommended. Use appropriate control measures such as fume hood, ventilated enclosure, isolator (i.e. glovebag/glove box) and/or cloased transfers to maintain airborne levels below OEL. Hand protection - Protective gloves complying with EN374. Chemical resistant gloves.Eye/face protection - Safety glasses with side shields conforming to EN166Respiratory protection - Use a properly fitted, air purifying or air fed respirator complying with an approved standard if a risk assessment indicated that it is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the respirator. Use respirators and components tested and approved under appropriate government standards such as CEN (EU)

Stability and reactivity

Reactive - Not water reactiveThermal stability - This material may be thermally unstable at temperatures that occur during routine handling, storage or transportation. This material should not be exposed to temperatures above 275oC. This temperature is based on a laboratory test (DSC) and assumes near atmospheres and quantities less than 500kgConditions to avoid - None knownIncompatible materials - Oxidising agentsHazardous decomposition products - Carbon monoxide, carbon dioxide, chloride hydrogen, fluorination hydrogen, nitrogen oxide

Disposal considerations

Dispose in accordance with local regulations