Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 299-434-3 | CAS number: 93882-40-7
Guidance on Safe Use
Administrative data
First-aid measures
- General advice: Move out of dangerous area and show safety data sheet to the doctor in attendance.
- If inhaled: If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
- In case of skin contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.
- In case of eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.
- If swallowed: Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.
Fire-fighting measures
- Suitable extinguishing media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
- Unsuitable extinguishing media: High volume water jet.
- Combustibility: Not classified as flammable or combustible, but will combust if ignited.
- Hazardous combustion products: Sulphur oxides, Carbon monoxide, Carbon dioxide and unburned hydrocarbons (smoke).
- Protective equipment and precautions for firefighters: In the event of fire, wear self-contained breathing apparatus. Exposure to decomposition products may be a hazard to health.
- Fire Fighting Instructions: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
- Personal precautions:
Advice for emergency responders: Ensure adequate ventilation, use personal protective equipment, material can create slippery conditions.
Advice for non-emergency personnel: Avoid contact with spilled material. Do not touch or walk through spilled material.
- Environmental precautions:
Prevent entry into waterways, sewers, basements or confined areas.
Local authorities should be advised if significant spillages cannot be contained.
Do not flush into surface water or sanitary sewer system.
Prevent further leakage or spillage if safe to do so.
Try to prevent the material from entering drains or water courses.
If the product contaminates rivers and lakes or drains inform respective authorities.
- Methods for cleaning up:
Prevent further leakage or spillage if safe to do so. Large Spills: Dyke far ahead of liquid spill for later recovery and disposal. Recover by pumping or with suitable absorbent.
Report spills as required to appropriate authorities. Seek the advice of a specialist before using dispersants.Dispose of according to local regulations. In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable
regulations.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations.
Material will float on water, use containment booms as a barrier to protect shorelines.
Handling and storage
- Precautions for safe handling:
Do not breathe vapours or spray mist.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
May cause sensitisation of susceptible persons by skin contact.
Smoking, eating and drinking should be prohibited in the application area.
Dispose of rinse water in accordance with local and national regulations.
Normal measures for preventive fire protection.
- Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
No decomposition if stored and applied as directed.
Storage temperature : 40 °C (104 ° F) - 80 °C (176 ° F)
Incompatible materials and coatings: butyl-rubber
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(Thio alkyl long chain alkyl ester)
- Labels:
- 9
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Thio alkyl long chain alkyl ester)
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(Thio alkyl long chain alkyl ester)
- Labels:
- 9
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
- No special requirements under ordinary conditions of use and with adequate ventilation. Effective exhaust ventilation system
- Personal protective equipment:
- Respiratory protection: In the case of vapour formation use a respirator with an approved filter. The applicable European standard can be found in EN 140, EN 137, EN 143, EN 14387.
- Hand protection: Polyvinyl alcohol or nitrile- butyl-rubber gloves Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the
gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves.The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
- Eye/face protection: Eye wash bottle with pure water. Tightly fitting safety goggles. Ensure that eyewash stations and safety showers are close to the workstation location.The applicable European standard can be found in EN 166.
- Skin and body protection: Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. Long sleeved clothing. The applicable European standard can be found in EN 14605.
- Advice on general occupational hygiene:
When using do not eat, drink or smoke.
Wash hands before breaks and immediately after handling the product.
Remove contaminated clothing and protective equipment before entering eating areas.
- Environmental exposure controls:
Prevent entry into waterways, sewers, basements or confined areas.
Local authorities should be advised if significant spillages cannot be contained.
Do not flush into surface water or sanitary sewer system.
Prevent further leakage or spillage if safe to do so.
Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities.
Stability and reactivity
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
Hazardous reactions : No hazards to be specially mentioned.
Conditions to avoid : Excessive heat.
Incompatible materials : Strong oxidizing agents
Hazardous decomposition products: no decomposition if used as directed.
Disposal considerations
-Waste treatment methods:
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Dispose of contents/ container to an approved waste disposal plant.
-Empty containers:
Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper instructions.
Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed.
Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations.
DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY
EXPLODE AND CAUSE INJURY OR DEATH.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
