Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 911-295-9 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
General advice Show this safety data sheet to the doctor in attendance
Warning
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids
Keep eye wide open while rinsing
If symptoms persist, call a physician
Warning
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids
Keep eye wide open while rinsing
If symptoms persist, call a physician
Fire-fighting measures
Suitable extinguishing media Use CO2, dry chemical, or foam
Extinguishing Media Which Must not be Used for Safety Reasons
Do not use a solid water stream as it may scatter and spread fire.
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases
Heating or fire can release toxic gas
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus and protective suit.
Other information :
Fire residues and contaminated fire extinguishing water must be disposed of in
accordance with local regulations
Cool containers / tanks with water spray.
Extinguishing Media Which Must not be Used for Safety Reasons
Do not use a solid water stream as it may scatter and spread fire.
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases
Heating or fire can release toxic gas
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus and protective suit.
Other information :
Fire residues and contaminated fire extinguishing water must be disposed of in
accordance with local regulations
Cool containers / tanks with water spray.
Accidental release measures
Personal precautions
Use personal protective equipment
Avoid contact with the skin and the eyes
Remove all sources of ignition
Heat, flames and sparks
Ensure adequate ventilation
Environmental precautions
Prevent entry into waterways, sewers, basements or confined areas
Do not allow material to contaminate ground water system.
Methods and materials for containment and cleaning up
Methods for containment : Prevent further leakage or spillage if safe to do so
Methods for cleaning up :
Contain spillage, and then collect with non-combustable absorbent material, (e.g. sand,
earth, diatomaceous earth, vermiculite) and place in container for disposal according to
local / national regulations (see section 13)
Use clean non-sparking tools to collect absorbed material
Use personal protective equipment
Avoid contact with the skin and the eyes
Remove all sources of ignition
Heat, flames and sparks
Ensure adequate ventilation
Environmental precautions
Prevent entry into waterways, sewers, basements or confined areas
Do not allow material to contaminate ground water system.
Methods and materials for containment and cleaning up
Methods for containment : Prevent further leakage or spillage if safe to do so
Methods for cleaning up :
Contain spillage, and then collect with non-combustable absorbent material, (e.g. sand,
earth, diatomaceous earth, vermiculite) and place in container for disposal according to
local / national regulations (see section 13)
Use clean non-sparking tools to collect absorbed material
Handling and storage
Precautions for safe handling :
Wear personal protective equipment
Ensure adequate ventilation
Avoid contact with skin, eyes and clothing
Do not eat, drink or smoke when using this product
There is a hazard associated with rags, paper or any other material used to remove
spills which become soaked with product. Avoid accumulation of these: they are to be
disposed off safely after use
Avoid static electricity build up with connection to earth
Prevention of fire and explosion :
Keep away from open flames, hot surfaces and sources of ignition Make sure of the
presence of air and inhibitor in the drums.
Hygiene measures : When using, do not eat, drink or smoke Remove and wash contaminated clothing before
re-use Wear suitable gloves and eye/face protection. Wash hands before breaks and
immediately after handling the product
Conditions for safe storage, including any incompatibilities
Technical measures/Storage conditions
Keep container tightly closed in a dry and well-ventilated place
Ensure all equipment is electrically grounded before beginning transfer operations
Protect from frost, heat and sunlight
Keep at temperatures below 45°C
Materials to avoid : Acids, Bases, Oxidizing agents, Reducing agents
Packageing material : Baked phenolic lined carbon steel drums, Plastic drum
Unsuitable materials for containers : copper, Iron
Further information : Respect the advised storage time (6 months after delivery date)
Wear personal protective equipment
Ensure adequate ventilation
Avoid contact with skin, eyes and clothing
Do not eat, drink or smoke when using this product
There is a hazard associated with rags, paper or any other material used to remove
spills which become soaked with product. Avoid accumulation of these: they are to be
disposed off safely after use
Avoid static electricity build up with connection to earth
Prevention of fire and explosion :
Keep away from open flames, hot surfaces and sources of ignition Make sure of the
presence of air and inhibitor in the drums.
Hygiene measures : When using, do not eat, drink or smoke Remove and wash contaminated clothing before
re-use Wear suitable gloves and eye/face protection. Wash hands before breaks and
immediately after handling the product
Conditions for safe storage, including any incompatibilities
Technical measures/Storage conditions
Keep container tightly closed in a dry and well-ventilated place
Ensure all equipment is electrically grounded before beginning transfer operations
Protect from frost, heat and sunlight
Keep at temperatures below 45°C
Materials to avoid : Acids, Bases, Oxidizing agents, Reducing agents
Packageing material : Baked phenolic lined carbon steel drums, Plastic drum
Unsuitable materials for containers : copper, Iron
Further information : Respect the advised storage time (6 months after delivery date)
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- Environmentally hazardous substance, liquid, n.o.s.
- Chemical name:
- UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Reaction
mass of decyl acrylate and octyl acrylate), 9, PG III, (E)
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Reaction
mass of decyl acrylate and octyl acrylate), 9, PG III
- Labels:
- 9
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Reaction
mass of decyl acrylate and octyl acrylate), 9, PG III - Chemical name:
- (Reaction
mass of decyl acrylate and octyl acrylate), 9, PG III
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Reaction
mass of decyl acrylate and octyl acrylate), 9, PG III - Chemical name:
- (Reaction
mass of decyl acrylate and octyl acrylate)
- Labels:
- 9L
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
General Information : Use personal protective equipment in good condition.
Respiratory protection :None under normal use conditions.
Eye protection :
Safety glasses with side-shields
Contact lenses should not be worn when working with this chemical
Skin and body protection : Long sleeved clothing
Hand protection: Neoprene gloves , According to permeation index EN 374: 5 (time elapsed > 240 mins)
Environmental exposure controls : Do not allow material to contaminate ground water system.
Respiratory protection :None under normal use conditions.
Eye protection :
Safety glasses with side-shields
Contact lenses should not be worn when working with this chemical
Skin and body protection : Long sleeved clothing
Hand protection: Neoprene gloves , According to permeation index EN 374: 5 (time elapsed > 240 mins)
Environmental exposure controls : Do not allow material to contaminate ground water system.
Stability and reactivity
Stability Stable under recommended storage conditions
Hazardous polymerisation : Inhibitors have been added to stabilize this product Maintaining air in the storage
containers is important to keep inhibitors active
Conditions to avoid :
Heat, flames and sparks
Take precautionary measures against static charges
Materials to avoid : Acids, Bases, Oxidizing agents, Reducing agents
Hazardous decomposition products :
Incomplete combustion and thermolysis produces potentially toxic gases such as carbon
monoxide and carbon dioxide
Hazardous polymerisation : Inhibitors have been added to stabilize this product Maintaining air in the storage
containers is important to keep inhibitors active
Conditions to avoid :
Heat, flames and sparks
Take precautionary measures against static charges
Materials to avoid : Acids, Bases, Oxidizing agents, Reducing agents
Hazardous decomposition products :
Incomplete combustion and thermolysis produces potentially toxic gases such as carbon
monoxide and carbon dioxide
Disposal considerations
Waste from Residues/Unused Products
Should not be released into the environment
Dispose of in accordance with the European Directives on waste and hazardous waste.
Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or
disposal.
Should not be released into the environment
Dispose of in accordance with the European Directives on waste and hazardous waste.
Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or
disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
