Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice:
Move out of dangerous area. Place and transport victim in stable position (lying sideways). Remove contaminated clothing immediately and dispose of safely.

Inhalation:
Move to fresh air. Keep patient warm and at rest. Call a physician or poison control center immediately.

Skin contact:
Wash off with soap and water.

Eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Get medical attention if irritation develops and persists.

Ingestion:
Rinse mouth. Do NOT induce vomiting. Call a physician or poison control center immediately.

Fire-fighting measures

Suitable Extinguishing media:
Water spray, Carbon dioxide (CO2), Foam, Sand

Special hazards arising from the substance or mixture:
Hydrogen chloride (HCl), Hydrogen cyanide (hydrocyanic acid), Carbon monoxide (CO), Nitrogen oxides (NOx)

Advice for firefighters:
Special protective equipment for firefighters
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing apparatus.

Further information:
Contain the spread of the fire-fighting media. Do not allow run-off from fire fighting to enter drains or water courses.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Avoid contact with spilled product or contaminated surfaces. Use personal protective equipment. Remove all sources of ignition.

Environmental precautions:
Do not allow to get into surface water, drains and ground water.

Methods and materials for containment and cleaning up:
Use mechanical handling equipment. Clean contaminated floors and objects thoroughly, observing environmental regulations. Keep in suitable, closed containers for disposal.

Handling and storage

Handling:
Use only in area provided with appropriate exhaust ventilation. Use in closed batch process. Comply with SCC conditions specified in Article 18 (4) of Regulation (EC) No. 1907 / 2006.

Advice on protection against fire and explosion:
Keep away from heat and sources of ignition.

Hygiene measures:
Avoid contact with skin, eyes and clothing. Keep working clothes separately. Wash hands before breaks and immediately after handling the product. Remove soiled clothing immediately and clean thoroughly before using again. Garments that cannot be cleaned must be destroyed (burnt).

Conditions for safe storage, including any incompatibilities:
Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Store in a place accessible by authorized persons only. Keep away from direct sunlight.
Keep away from food, drink and animal feedingstuffs.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
No dangerous good in sense of these transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
No dangerous good in sense of these transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
No dangerous good in sense of these transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
No dangerous good in sense of these transport regulations.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
Provide adequate ventilation. Use in closed batch process. Comply with SCC conditions specified in Article 18 (4) of Regulation (EC) No. 1907 / 2006.

Respiratory protection:
If product contact may occur (accidents, incidents):
Wear respirator with a particle filter mask conforming to European norm EN149 FFP3 or equivalent.
Respiratory protection should only be used to control residual risk of short duration activities, when all reasonably practicable steps have been taken to reduce exposure at source e.g. containment and/or local extract ventilation. Always follow respirator manufacturer's instructions regarding wearing and maintenance.

Hand protection:
Material: nitrile-rubber or butyl-rubber
Glove thickness: 0,35 mm

Eye protection:
Wear goggles (conforming to EN166, Field of Use = 5 or equivalent).

Skin and body protection:
Wear standard coveralls and Category 3 Type 5 suit.
If there is a risk of significant exposure, consider a higher protective type suit.
Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.
If chemical protection suit is splashed, sprayed or significantly contaminated, decontaminate as far as possible, then carefully remove and dispose of as advised by manufacturer.

Stability and reactivity

Disposal considerations