Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information: In case of accident or if you feel unwell, seek medical advice immediately.
After inhalation: Supply fresh air. Seek medical treatment.
After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: Rinse out mouth and then drink plenty of water. Call a doctor immediately.

Most important symptoms and effects, both acute and delayed: No further relevant information available.

Indication of any immediate medical attention and special treatment needed: No further relevant information available

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet

Special hazards arising from the substance or mixture: Hydrogen chloride (HCl), Chlorine

Advice for firefighters
Protective equipment: Wear self-contained respiratory protective device. Wear fully protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
The usual precautionary measures are to be adhered to when handling chemicals. Avoid formation of dust. Avoid contact with the eyes and skin.
Environmental precautions: No special measures required.

Methods and material for containment and cleaning up: Pick up mechanically. Send for recovery or disposal in suitable receptacles.

Reference to other sections:
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

Handling and storage

Precautions for safe handling
Wear protective equipment. Keep unprotected persons away. The usual precautionary measures are to be adhered to when handling chemicals. Prevent formation of dust.
Information about fire - and explosion protection: The product is not combustible.

Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: Corrosive action on metals.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed. Store in dry conditions.
Recommended storage temperature: < 30 °C
Specific end use(s): No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN3260
Shipping information
Proper shipping name and description:
3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Rhodium(III) chloride hydrate)
Chemical name:
Rhodium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Special provisions:
Special precautions for user: Warning: Corrosive substances.
Remarks:
Environmental hazards: Not applicable
Danger code (Kemler): 80
Segregation groups: Acids
Limited quantities (LQ): 5 kg
Transport category: 3
Tunnel restriction code: E
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN3260
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Rhodium(III) chloride hydrate)
Chemical name:
Rhodium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable
Special precautions for user Warning: Corrosive substances
Danger code (Kemler): 80
EMS Number: F-A,S-B
Segregation groups Acids

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN3260
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Rhodium(III) chloride hydrate)
Chemical name:
Rhodium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable
Special precautions for user Warning: Corrosive substances
Danger code (Kemler): 80
EMS Number: F-A,S-B
Segregation groups Acids

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable.
UN "Model Regulation": UN3260, CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S., 8, III

Exposure controls / personal protection

Control parameters
Ingredients with limit values that require monitoring at the workplace:
Additional information: The lists valid during the making were used as basis.

Exposure controls
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Do not eat or drink while working. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. Do not inhale dust / smoke / mist.
Respiratory protection: Use respiratory protective device against the effects of fumes/dust/aerosol. Filter P3
Protection of hands: Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
For the permanent contact gloves made of the following materials are suitable: Fluorocarbon rubber (Viton), Butyl rubber, BR
Eye protection: Tightly sealed goggles
Body protection: Protective work clothing

Stability and reactivity

Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. To avoid thermal decomposition do not overheat.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: Corrosive action on metals.
Hazardous decomposition products: No dangerous decomposition products known.
Additional information: -

Disposal considerations

Waste treatment methods
Recommendation
Contact manufacturer for recycling information.
Disposal must be made according to official regulations.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.