Registration Dossier

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
auto-ignition temperature (liquids)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
April 2016 - December 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
Deviations:
no
Qualifier:
according to guideline
Guideline:
DIN 51794 (Testing of mineral oil hydrocarbons - Determination of ignition temperature)
Deviations:
no
Qualifier:
according to guideline
Guideline:
IEC 60079-4 (Electrical apparatus for explosive gas atmospheres. Part 4: Method of test for ignition temperature)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Specific details on test material used for the study:
- Batch No.of test material:15072477V3
- Expiration date of the batch: 31 January 2021
- Purity test date: 02 february 2016

- Storage condition of test material: In refrigerator (2-8°C)

- Treatment of test material prior to testing: No specific handling conditions required
Key result
Auto-ignition temperature:
240 °C
Atm. press.:
> 1 011.8 - < 1 022.3 hPa

Ignition of the test item within 5 minutes after introduction was observed with each sample volume and with each test a minimum auto-ignition temperature was obtained. The maximum deviation between the three values was < 10°C.

According to the guidelines, no further testing was required. The lowest temperature at which ignition of the test item occurred was 242°C. This temperature was rounded down to the nearest multiple of 5°C giving an auto-ignition temperature of the test item of 240°C

Table 1 : Main study - auto-ignition temperature of the test item

Test

Volume [μL]

Auto-ignition temperature [°C]

Ignition delay [s]

Colour of the flame

Minimum autoignition temperature [°C]

1

70

251

16

blue

242

150

244

26

blue

300

242

35

blue

500

247

35

blue

2

60

254

14

blue

244

250

244

35

blue

550

251

36

blue

3

50

255

12

blue

245

200

245

27

blue

450

248

42

blue

Conclusions:
An auto-ignition temperature apparatus was used for the determination of the degree of auto-ignitability of Sulfonyl vinyl ether perfluorurate.
The test item is auto-ignitable with an auto-ignition temperature of 240°C at 1011.8 – 1022.3 hPa.
Executive summary:

The Sulfonyl vinyl ether perfluorurate is auto-ignitable with an auto-ignition temperature of 240°C at 1011.8 – 1022.3 hPa.

Description of key information

One reliable key study (Klimisch 1) is available. The auto-ignition temperature was determined according to recognized gudielines (EU method A.15, DIN 51794 and IEC 79 -4) and under GLP.

No deviations from the guidelines were observed during the test.

Key value for chemical safety assessment

Autoflammability / Self-ignition temperature at 101 325 Pa:
240 °C

Additional information