Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

As a general rule, in case of doubt or if symptoms persist, always call a doctor.

NEVER induce swallowing in an unconscious person.

In the event of exposure by inhalation:

If a large quantity is inhaled, move the patient into the fresh air and keep him/her warm and still.

In the event of splashes or contact with eyes:

Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.

Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.

In the event of splashes or contact with skin:

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner.

DO NOT use solvents or thinners.

In the event of swallowing:

If the ingested quantity is low, rinse the mouth with water and, if the patient feels unwell, refer to a doctor

Fire-fighting measures

Suitable extinguishing media:

Carbon dioxide (CO2) - Foam - Dry chemicals

Special protective equipment for fire-fighters:

In case of abundant fumes, fire fighters must use self-contained breathing apparatus.

Accidental release measures

Environmental precautions:

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums

for waste disposal.

Prevent any material from entering drains or waterways.

Methods for cleaning up:

Clean preferably with a detergent, do not use solvents.

Handling and storage


Handle in well-ventilated areas.

Fire prevention:

Prevent access by unauthorised personnel.

Recommended equipment and procedures:

Every opened packing must, as far as possible, be entirely emptied


The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid cannot spread beyond this


Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Use personal protection equipment as per Directive 89/686/EEC.

Technical measures:

Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.

Personnel shall wear regularly laundered overalls.

Respiratory protection:

None required

Hand protection:

Protective creams may be used for exposed skin, but they should not be applied after contact with the product.

When using gloves they must be in nitrile rubber (HNBR)

Eye and face protection:

Use eye protectors designed to protect against liquid splashes

Stability and reactivity

stable under normal conditions.

Materials to avoid:

Natural rubber, polyacrylate, polybutadiene and the likes

Hazardous decomposition products:

By burning : carbon mono- and di-oxides

Disposal considerations

Do not pour into drains or waterways.


Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.

Do not contaminate the ground or water with waste, do not dispose of waste into the environment.

Soiled packaging:

Empty container completely. Keep label(s) on container.

Give to a certified disposal contractor.