Registration Dossier

Administrative data

First-aid measures

Description of necessary first-aid measures:

General advice: Show this safety data sheet to the doctor in attendance.
Inhalation: Move to fresh air. Oxygen or artificial respiration if needed. Keep under medical surveillance. In case of problems : Hospitalize immediately.
Skin contact: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Keep under medical surveillance. In case of extensive burns, hospitalize.
Eye contact: Wash open eyes immediately, abundantly and thoroughly for at least 15 minutes. Remove contact lenses. Consult an ophthalmologist
immediately.
Ingestion: Do NOT induce vomiting. Rinse mouth. Hospitalize immediately.
Protection of first-aiders: Protective suit. In case of insufficient ventilation, wear suitable respiratory equipment.

Most important symptoms/effects, acute and delayed: No data available.

Indication of immediate medical attention and special treatment needed, if necessary: No data available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: Carbon dioxide (CO2), foam, dry chemical.
Unsuitable extinguishing media: High volume water jet.

Special hazards arising from the substance or mixture: formation of toxic products through combustion: carbon oxides.

Advice for firefighters:
Specific methods:
In the event of fire and/or explosion do not breathe fumes. Use water spray to cool unopened containers. Do not allow run-off from fire fighting
to enter drains or water courses.
Special protective actions for fire-fighters: In the event of fire, wear self-contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas. Remove all sources of ignition. Prohibit contact with skin and eyes. Avoid inhalation of vapour or mist.

Environmental precautions:
Do not flush into surface water or sanitary sewer system. Do not release into the environment.

Methods and materials for containment and cleaning up:
Recovery:
Shovel into suitable container for disposal. Absorb the remainder with an inert absorbent material (sand, vermiculite, perlite). Use clean nonsparking
tools to collect absorbed material.

Elimination:
Waste treatment:
Disposal of product: Do not release into the environment. Dispose of in accordance with local regulations.
Disposal of packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal.

Handling and storage

Precautions for safe handling:
Technical measures/Precautions:
Storage and handling precautions applicable to products: Liquid. Toxic. Corrosive. Sensitizing. Provide appropriate exhaust ventilation at machinery. Provide showers, eye-baths.

Safe handling advice:
Remove all sources of ignition. Avoid static electricity build up with connection to earth. In case of insufficient ventilation, wear suitable respiratory equipment.

Hygiene measures:
Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.

Conditions for safe storage, including any incompatibilities:
Keep tightly closed in a dry, cool and well-ventilated place. Store in original container. Protect from frost, heat and sunlight. Keep away from open flames, hot surfaces and sources of ignition. Make sure of the presence of air and inhibitor in the drums. In addition, the product's inhibitor(s) require the presence of dissolved oxygen. An air space is required above the liquid in all containers; avoid storage under an oxygen-free atmosphere.
Storage period: 6 Months, Storage temperature: < 45 °C

Incompatible products:
Acids, Bases, Oxidizing agents, Reducing agents.

Packaging material:
Recommended: Baked phenolic lined carbon steel drums, Plastic drum.
To be avoided: copper, Iron.

Specific end use(s): None.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN2922
Shipping information
Proper shipping name and description:
CORROSIVE LIQUID, TOXIC, N.O.S. (BUTANE-1,3-DIYL DIACRYLATE)
Language:
English
Labels:
8(6.1)
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
un2922
Shipping information
Proper shipping name and description:
CORROSIVE LIQUID, TOXIC, N.O.S. (BUTANE-1,3-DIYL DIACRYLATE)
Language:
English
Labels:
8(6.1)
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN2922
Shipping information
Proper shipping name and description:
CORROSIVE LIQUID, TOXIC, N.O.S. (BUTANE-1,3-DIYL DIACRYLATE)
Labels:
8(6.1)
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN2922
Shipping information
Proper shipping name and description:
Corrosive liquid, toxic, n.o.s. (Butane-1,3-diyl diacrylate)
Labels:
8(6.1)
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
Appropriate engineering controls: When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Personal protective equipment:
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Hand protection: Gloves nitrile rubber
Products used with solvents
Do not use:Natural Rubber, Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Eye/face protection: Safety glasses with side-shields, Do not wear contact lenses.
Skin and body protection: Long sleeved clothing

Environmental exposure controls:

Environmental precautions:
Do not flush into surface water or sanitary sewer system. Do not release into the environment.

Methods and materials for containment and cleaning up:
Recovery:
Shovel into suitable container for disposal. Absorb the remainder with an inert absorbent material (sand, vermiculite, perlite). Use clean nonsparking tools to collect absorbed material.

Elimination:
Disposal of product: Do not release into the environment. Dispose of in accordance with local regulations.
Disposal of packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal.

Stability and reactivity

Reactivity: No data available.

Chemical stability: The product is stable under recommended handling and storage conditions.

Possibility of hazardous reactions:
Inhibitors have been added to stabilize this product. Maintaining air in the storage containers is important to keep inhibitors active. Unless inhibited, hazardous polymerisation may occur. Polymerization is exothermic and can degenerate into an uncontrolled reaction.

Conditions to avoid: Heat, flames and sparks. Remove all sources of ignition. Take precautionary measures against static discharges.

Incompatible materials to avoid: Acids, Bases, Oxidizing agents, Reducing agents.

Hazardous decomposition products: formation of toxic products through combustion: carbon oxides.

Disposal considerations

Waste treatment:
Disposal of product: Do not release into the environment. Dispose of in accordance with local regulations.
Disposal of packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal.