Registration Dossier

Physical & Chemical properties

Surface tension

Currently viewing:

Administrative data

Link to relevant study record(s)

surface tension
Type of information:
experimental study
Adequacy of study:
key study
Study period:
The study was conducted on 24 February 2016
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
comparable to guideline study
equivalent or similar to guideline
OECD Guideline 115 (Surface Tension of Aqueous Solutions)
not specified
GLP compliance:
Study was not conducted under a specific Good Laboratory Practices (GLP) program, this study was conducted following the principles of GLP by experienced and trained personnel using calibrated standards and instrumentation. Relevant SOPs were followed
Type of method:
plate method
Specific details on test material used for the study:
Lot/Batch number: 1004R18708
Key result
Surface tension:
> 64.883 - < 64.98 N/m
21 °C
0 other: as from sample preparation
The average surface tension of RD14156 was determined to be 64.92 [mN/m].
Executive summary:

A Kruss Processor Tensiometer K100 was used to determine the surface tension of RD14156 using test method guidelines as set forth under OECD 115. For the test, an appropriate amount of RD14156 was dispersed in distilled water and shaken for 120hrs at 30°C to establish solution equilibrium, before equilibrating the solution at 24°C for 24 hrs. The samples were centrifuged at 5000rpm for 15min and the supernatant was passed through a 0.45μm filter before further diluting to 90% of its former concentration with distilled water.

The average surface tension of RD14156 was determined to be 64.92 [mN/m].

Description of key information

A surface tension measurement was carried out using methods as set forth under OECD 115 test guidelines when using a Kruss Processor Tensiometer K100. The average surface tension of RD14156 was determined to be 64.92 [mN/m].

Key value for chemical safety assessment

Surface tension:

Additional information