Registration Dossier

Administrative data

First-aid measures

DESCRIPTION OF FIRST AID MEASURES
Inhalation -
If inhaled, move to fresh air. Rinse nose and mouth with water. Get medical attention if symptoms (irritation) develop and persist.

Skin contact -
Remove contamination clothing. Wash exposed skin with soap and water for at least 15 minutes. Seek medical attention if symptoms (irritation) develop and persist.

Eye contact -
Rinse eyes with plenty of water for at leat 15 minutes and occasionally lifting the upper and lower eyelids. Remove contact lenses if worn and easy to do, continue rinsing. Seek medical attention if symptoms (irritation) develop and persist.

Ingestion -
If swallowed, wash out mouth with water. Seek medical attention if larger quantities have been ingested.

MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
To the best of our knowledge the toxicity of this substance has not been fully investigated, thus symptoms and effects are not fully known. Irritation effects such as skin and eye irritation and to upper respiratory tract are expected. Other adverse effects cannot be excluded.

INDICATION OF ANY IMMEDICATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
Treat symptomatically and supportively.

Fire-fighting measures

EXTINGUISHING MEDIA
Suitable extinguishing media -
Use water spray, foam, dry powder or carbon dioxide as appropriate for surrounding fire and materials.

Unsuitable extinguishing media -
No limitations given for this substance

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Combustible, but not flammable. In case of fire toxic fumes or carbon monoxied (CO) and nitrogen oxides (NOx) may be formed. No explosivity or flammability data identified. High concentrations of finely divided airborne organic particles can potentially explode if ignited.

ADVICE FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Prevent fire-extinguishing water from contaminating the watercourses.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
If product is released or spilled, take proper precatuionsto minimize exposure by using apporpriate personal protective equipment (see section Exposure controls / Personal protection). Avoid raising dust.

ENVIRONMENTAL PRECAUTIONS
Collect spillage and place in specific bins and send for destruction. Avoid release to drains.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
A small spill may be handled with water moistened disposable cloth and placed in container for chemical waste. A larger spill should be collected and placed in container for disposal. Use recommended personal protective equipment. Wash spill site with water after completed pick up.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING
Avoid dust generation and inhalation of dust. Avoid contact with eyes and skin. Ensure good ventilation. The material may form flammable dust clouds in air. Dust cluds may be extremely sensitive to ignition by electrostatic discharge and other ignition sources. Ensure good earthing of equipment and personnel.

CONDITIONS FOR SAFE STORAGE, INCLUDING AND INCOMPATIBILITIES
Store at ambient conditions, generally 15 to 25C, and keep the container tightly closed.

Transport information

Land transport (ADR/RID)

UN number:
Not classified as dangerous good according to transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified as dangerous good according to transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as dangerous good according to transport regulations.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as dangerous good according to transport regulations.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

CONTROL PARAMETERS
To the best of our knowledge, established occupational exposure limit value is not available.

EXPOSURE CONTROL
Appropriate engineering controls -
Use appropriate controls (e.g. containment, local exhaust ventilation) as specified in a workplace risk assessment. Technical measures and appropriate operations should be given priority over the use of personal protective equipment. Handle in accordance wiht good industrial hygiene and safety practice.

Personal protective equipment -
Eye face protection: Wear sfety glasses with side shields. An emergency eyewash station should be available.
Skin protection : Handle wiht gloves. The selected gloves must comply with the specifications in EC Directive 89/686/EEC and the related standard EN374 or applicable federal, state and national legislation.
Protective clothing: Use impervious, disposable clothign to prevent skin contact. The type should be selected according to concentrations, quantities and duration of handling at the specific workplace.
Respiratory protection: Required when dusts are generated. Where risk assessment shows that an air-purifying respirator is appropriate, use filter of type P3 (EN 143) or N100 (NIOSH) or types recommended in applicable federal, state and national legislation.
Environmental exposure controls: Do not empty into drains.

Stability and reactivity

Reactivity -
No known reactivity hazards under normal conditions.

Chemical stability -
The substance is chemically stable at standarad room temperature conditions, generally 15 to 25C.

Possibility of hazardous reactions and conditions to avoid -
No known hazardous reaction.
Avoid exposure to moisture and sunlight.

Incompatible materials -
Strong oxidants; strong acids or bases.

Hazardous decomposition products -
Carbon oxides (COx) and nitrogen oxides (NOx) may be formed.

Disposal considerations

Waste treatment methods -
Dispose waste at authorized plant, in accordance with Directive 2008/98/EC and/or applicable federal, state, national or local legislation.