Registration Dossier

Administrative data

First-aid measures

IRRITANT PREPARATION. Its repeated or prolonged contact with the skin or mucous membranes can cause irritant symptoms such as reddening of the skin, blisters, or dermatitis. Some of the symptoms may not be immediate. They can cause allergic reactions on the skin.
Description of first aid measures.
In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons who are unconscious.
Inhalation.
Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration. Do not administer anything orally. If unconscious, place them in a suitable position and seek medical assistance.
Eye contact.
If wearing contact lenses, remove them. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up, and seek medical assistance.
Skin contact.
Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or thinners.
Ingestion.
If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.
Most important symptoms and effects, both acute and delayed.
Irritant Product, repeated or prolonged contact with skin or mucous membranes can cause redness, blisters or dermatitis, inhalation of spray mist or particles in suspension may cause irritation of the respiratory tract, some symptoms may not be immediate. Can cause allergic reactions.
Indication of any immediate medical attention and special treatment needed.
In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons who are unconscious.

Fire-fighting measures

The product does not present any particular risk in case of fire.
Extinguishing media.
Recommended extinguishing methods.
Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water spray. Do not use a direct stream of water to extinguish.
Special hazards arising from the substance.
Special risks.
Fire can cause thick, black smoke. As a result of thermal decomposition, dangerous products can form: carbon monoxide, carbon dioxide. Exposure to combustion or decomposition products can be harmful to your health.
Advice for firefighters.
Use water to cool tanks, cisterns, or containers close to the heat source or fire. Take wind direction into account. Prevent the products used to fight the fire from going into drains, sewers, or waterways.
Fire protection equipment.
According to the size of the fire, it may be necessary to use protective suits against the heat, individual breathing equipment, gloves, protective goggles or facemasks, and gloves.

Accidental release measures

Personal precautions, protective equipment and emergency procedures.
For exposure control and individual protection measures, see the pertinent section
Environmental precautions.
Prevent the contamination of drains, surface or subterranean waters, and the ground.
Methods and material for containment and cleaning up.
Pick up the spill with non-combustible absorbent materials (soil, sand, vermiculite, diatomite, etc.). Pour the product and the absorbent in an appropriate container. The contaminated area should be immediately cleaned with an appropriate decontaminator.
Pour the decontaminator on the remains in an opened container and let it act various days until no further reaction is produced.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.

Precautions for safe handling.
For personal protection, see pertinent section. Never use pressure to empty the containers. They are not pressure-resistant containers. In the application area, smoking, eating, and drinking must be prohibited.
Follow legislation on occupational health and safety.
Keep the product in containers made of a material identical to the original.
Conditions for safe storage, including any incompatibilities.
Store according to local legislation. Observe indications on the label. Keep far away from ignition points. Keep away from oxidising agents and from highly acidic or alkaline materials. Do not smoke. Prevent the entry of non-authorised persons. Once the containers are open, they must be carefully closed and placed vertically to prevent spills.
The product is not affected by Directive 2012/18/EU (SEVESO III).
Specific end use(s).
Not available.

Transport information

Land transport (ADR/RID)

UN number:
Not classifed
Shippingopen allclose all
Class:
Not classifed
Classification code:
Not classifed
Packaging group:
Not classifed
Labels:
Not classifed
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classifed
Shippingopen allclose all
Class:
Not classifed
Classification code:
Not classifed
Packaging group:
Not classifed
Labels:
Not classifed
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classifed
Proper shipping name and description:
Not classifed
Chemical name:
8-anilinonaphthalene-1-sulphonic acid
Class:
Not classifed
Packaging group:
Not classifed
EmS code:
Not classifed
Labels:
Not classifed
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classifed
Chemical name:
8-anilinonaphthalene-1-sulphonic acid
Class:
Not classifed
Packaging group:
Not classifed
Labels:
Not classifed
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.

Control parameters.
The product does NOT contain substances with Professional Exposure Environmental Limit Values.The product does NOT contain substances with Biological Limit Values.
Exposure controls.
Measures of a technical nature:
Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.
Concentration: 100 %
Uses: For manufacturing, processing, laboratory or repacking use only Breathing protection:
If the recommended technical measures are observed, no individual protection equipment is necessary.
Hand protection:
If the product is handled correctly, no individual protection equipment is necessary.
Eye protection:
If the product is handled correctly, no individual protection equipment is necessary.
Skin protection:
PPE: Work footwear.
Characteristics: «CE» marking, category II.
CEN standards: EN ISO 13287, EN 20347
Maintenance: This product adapts to the first user's foot shape. That is why, as well as for hygienic reasons, it should not be used by other people.
Observations: Work footwear for professional use includes protection elements aimed at protecting users against any injury resulting from an accident

Stability and reactivity

Reactivity.
The product does not present hazards by their reactivity.
Chemical stability.
Stable under the recommended handling and storage conditions, see the pertinent section.
Possibility of hazardous reactions.
The product does not present possibility of hazardous reactions.
Conditions to avoid.
Avoid any improper handling.
Incompatible materials.
Keep away from oxidising agents and from highly alkaline or acidic materials in order to prevent exothermic reactions.
Hazardous decomposition products.
No decomposition if used for the intended uses.

Disposal considerations

Waste treatment methods.
Do not dump into sewers or waterways. Waste and empty containers must be handled and eliminated according to current, local/national legislation.
Follow the provisions of Directive 2008/98/EC regarding waste management.