Registration Dossier

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
(Q)SAR
Adequacy of study:
key study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification
Justification for type of information:
1. SOFTWARE: Epi Suite

2. MODEL (incl. version number): MPBPWIn v1.43

3. SMILES OR OTHER IDENTIFIERS USED AS INPUT FOR THE MODEL: C(CO)N(CCO)C(CO)(CO)CO

4. SCIENTIFIC VALIDITY OF THE (Q)SAR MODEL: not required (MPBPWIN is considered a recognised calculation method as required in the REACH Regulation, Annex VII, 7.4, column 2)

5. APPLICABILITY DOMAIN: not required (MPBPWIN is considered a recognised calculation method as required in the REACH Regulation, Annex VII, 7.4, column 2)

6. ADEQUACY OF THE RESULT: not applicable (endpoint is not relevant for classification and labelling and risk assessment)
Qualifier:
according to guideline
Guideline:
other: ECHA Guidance on information requirements and chemical safety assessment Chapter R.6: QSARs and grouping of chemicals
Deviations:
no
Principles of method if other than guideline:
Estimation of vapour pressure using MPBPwin v1.43 as part of EPISuite.
GLP compliance:
no
Type of method:
other: Calculation
Key result
Temp.:
25 °C
Vapour pressure:
0 Pa
Conclusions:
Using MPBPWIN v1.43 the vapour pressure of the test item was calculated to be 0.000000219 Pa at 25 °C.
Executive summary:

The vapour pressure was calculated using MPBPWIN v1.43 as part of EPISuite v4.11 from US Environmental Protection Agency. Using MPBPWIN v1.43 the vapour pressure of the test item was calculated to be 0.000000219 Pa at 25 °C.

Description of key information

Using MPBPWIN v1.43 the vapour pressure of the test item was calculated to be 0.000000219 Pa at 25 °C (reference 4.6 -1).

Key value for chemical safety assessment

Vapour pressure:
0 Pa
at the temperature of:
25 °C

Additional information

The vapour pressure was calculated using MPBPWIN v1.43 as part of EPISuite v4.11 from US Environmental Protection Agency. Using MPBPWIN v1.43 the vapour pressure of the test item was calculated to be 0.000000219 Pa at 25 °C.