Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove from exposure area and allow to rest in fresh air.
Seek medical advice if symptoms persist.
Emergency measure - Eyes: Flish immediately with plenty of water for at least 15
minutes. Seek medical attention if irritation develops and
persists.
Emergency measure - Skin: Remove contaminated clothing and wash skin with soap and
water. Seek medical attention if irritation persists.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Dry powder, foam, water spray or fog, carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon, nitrogen
and sufur, organic acids and copper containing compounds).
However, there is no experimental evidence to support the
anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages of solutions with a suitable inert material
(eg sand or soil). For larger spills, dike around spill with
absorbent material. Carefully transfer the spillage to
waste containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.


Clean the spillage area with water and detergent. Do not
wash spillages to the open sewer.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by skin,
eye and inhalation exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368.

Eye protection to Standard EN166.


When necessary appropriate respiratory protection should be
used.

Storage: Store in a cool, dry, well-ventilated area, away from
sources of ignition.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Neat dyestuff and ink preparations will be packaged in an
appropriate container (not yet decided) and will be labelled
accordingly.


Ink cartridges will be packaged individually within an
ink-tight bag, contained in a card box.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport: Avoid crushing containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None known.

Dust explosion: There is no potential dust explosion hazard as the substance
is manufactured in liquid form.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: It may be possible to recover uncontaminated material for
subsequent use.

Industry - Possibility of neutralisation: No hazardous properties have been identified during the
notification studies.

Industry - Possibility of destruction: controlled discharge: Spillages mixed with inert material (eg sand or soil) and
contaminated packaging may be disposed of by landfill in
accordance with local regulations.

Industry - Possibility of destruction - incineration: The substance may be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg oxides of
carbon, nitrogen and sulfur, organic acids and copper
containing compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance will not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems are not
anticipated.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.