Registration Dossier

Physical & Chemical properties

Endpoint summary

Administrative data

Description of key information

Appearance

On the basis of physical observation, the appearance of test chemical was observed to be an inorganic solid in the form of white crystalline powder.

Melting point

On the basis of available data from handbooks, authoritative databases and secondary source, the melting point of test chemical was observed to be 200°C.

 

Boiling Point

On the basis of available data from reliable sources, it has been observed that the test chemical decomposes before boiling at temperature of 240°C.

 

Density

On the basis of available data from handbooks and authoritative databases, the density of test chemical was determined to be 1.634 g/cm3.

 

Particle size distribution

On the basis of available data,the particle size distribution of test chemical was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determined to be in the range of 150 micron to 106 micron.

 

Vapour pressure

On the basis of available data from modelling database, Modified Grain method was used to estimate the vapour pressure of test chemical using MPBPVP v1.43 of EPI Suite. The estimated vapour pressure of test chemical was evaluated to be 2.74E-006 Pa (2.06E-008 mm Hg) at 25°C.

 

Partition coefficient

The study does not need to be conducted because the substance is inorganic.

 

Water solubility

Based on the available data from handbook and authoritative database, the water solubility of test chemical was determined to be 830000 mg/l. On the basis of this value, test chemical was considered to be very soluble in water.

 

Surface tension

The study does not need to be conducted because surface activity is not a desired property of the material.

 

Flash point

The study does not need to be conducted because the substance is inorganic.

 

Auto flammability

Test chemical did not catch fire on being exposed to air at room temperature of 27°C pressure of 962 hPa. This indicates that the test chemical is not auto-flammable.

 

Flammability

Test chemical does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that test chemical is not flammable.

 

Explosiveness

The study does not need to be conducted because the there are no chemical groups present in the molecule which are associated with explosive properties.

 

Oxidizing properties

The study does not need to be conducted because the substance is a solid.

Additional information

Appearance

On the basis of physical observation, the appearance of test chemical was observed to be an inorganic solid in the form of white crystalline powder.

In a supporting study from handbook, authoritative database and secondary source, the appearance of test chemical was observed to be white crystalline solid or granules.

Additional study from handbook, authoritative database and secondary source indicates the appearance of test chemical as white crystalline solid.

In another study from handbooks, test chemical appears to be a white granules or rhombic crystals.

 

Melting point

On the basis of available data from handbooks, authoritative databases and secondary source, the melting point of test chemical was observed to be 200°C.

 

Boiling Point

On the basis of available data from reliable sources, it has been observed that the test chemical decomposes before boiling at temperature of 240°C.

 

Density

On the basis of available data from handbooks, authoritative databases and secondary source, the density of test chemical was determined to be 1.634 g/cm3 at a temperature range of 20 to 28°C.

Particle size distribution

On the basis of available data, the particle size distribution of test chemical was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determined to be in the range of 150 micron to 106 micron.

 

Vapour pressure

On the basis of available data from modelling database, Modified Grain method was used to estimate the vapour pressure of test chemical using MPBPVP v1.43 of EPI Suite. The estimated vapour pressure of test chemical was evaluated to be 2.74E-006 Pa (2.06E-008 mm Hg) at 25°C.

 

Partition coefficient

The study does not need to be conducted because the substance is inorganic.

 

Water solubility

Based on the available data from handbook and authoritative database, the water solubility of test chemical was determined to be 830000 mg/l.

In a supporting study from handbook, test chemical was reported to be very soluble in water.

Thus, on the basis of available information, test chemical was considered to be very soluble in water.

 

Surface tension

The study does not need to be conducted because surface activity is not a desired property of the material.

 

Flash point

The study does not need to be conducted because the substance is inorganic.

 

Auto flammability

Test chemical did not catch fire on being exposed to air at room temperature of 27°C pressure of 962 hPa. This indicates that the test chemical is not auto-flammable.

 

Flammability

Test chemical does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that test chemical is not flammable.

 

Explosiveness

The study does not need to be conducted because the there are no chemical groups present in the molecule which are associated with explosive properties.

 

Oxidizing properties

The study does not need to be conducted because the substance is a solid.