Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
Eye contact:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.

Inhalation:
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If necessary, call a poison center or physician. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Skin contact:
Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Ingestion:
Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Protection of first-aiders:
No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

MOST IMPORTANT SYMPTOMS AND EFFECTS; BOTH ACUTE AND DELAYED
Potential acute health effects
Eye contact: Causes serious eye irritation.
Inhalation: May cause respiratory irritation. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.
Skin contact: Causes skin irritation.
Ingestion: Irritating to mouth, throat and stomach.

Over-exposure signs/symptoms
Eye contact: Adverse symptoms may include the following:
pain or irritation
watering
redness

Inhalation: Adverse symptoms may include the following:
respiratory tract irritation
coughing

Skin contact: Adverse symptoms may include the following:
irritation
redness

INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
Notes to physician:
In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Specific treatments: No specific treatment.

Fire-fighting measures

EXTINGUISHING MEDIA
Suitable extinguishing media: Use dry chemical, CO2, water spray (fog) or foam.
Unsuitable extinguishing media: None known.

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Hazards from the substance or mixture: Combustible
Hazardous combustion products: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
nitrogen oxides

ADVICE FOR FIREFIGHTERS
Special precautions for firefighters:
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
For non-emergency personnel:
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

For emergency responders:
If specialised clothing is required to deal with the spillage, take note of any information see Exposure Controls on suitable and unsuitable materials. See also the information in "For non-emergency personnel".

ENVIRONMENTAL PRECAUTIONS
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Small spill:
Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor.

Large spill:
Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor.

REFERENCE TO OTHER SECTIONS
See SDS Section 1 for emergency contact information.
See Section "Exposure Control" for information on appropriate personal protective equipment.
See Section "Disposal considerations" for additional waste treatment information.

Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses (section 3.5) should be consulted for any available use-specific information provided in the Exposure Scenario(s).

PRECAUTIONS FOR SAFE HANDLING
Protective measures:
Put on appropriate personal protective equipment (see section EXPOSURE CONTROLS/PERSONAL PROTECTION). Do not ingest. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.

Advice on general occupational hygiene:
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

SPECIFIC END USE(S)
Recommendations: Not available.
Industrial sector specific solutions: Not available.

The substance must be handled under strictly controlled conditions as laid out in Article 18 paragraph 4 REACH-regulation. DETAILED information on risk management measures recommended to the user in accordance with Art. 18 paragraph 4 and ECHA REACH Guidance on intermediates (2010), Annex 3 and Practical Guide 16 (2014) is attached to section 13 of the IUCLID dossier.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated.
Shipping information
Proper shipping name and description:
n.a.
Language:
English
Labels:
n.a.
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated.
Shippingopen allclose all
Labels:
n.a.
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated.
Shipping information
Proper shipping name and description:
n.a.
Labels:
n.a.
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated.
Shipping information
Proper shipping name and description:
n.a.
Labels:
n.a.
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL and the IBC Code: Not available

Exposure controls / personal protection

The information in this section contains generic advice and guidance. The list of Identified Uses (section 3.5) should be consulted for any available use-specific information provided in the Exposure Scenario(s).

CONTROL PARAMETERS
Occupational exposure limits: No exposure limit value known.

Recommended monitoring procedures:
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances.

Derived effect levels: No DELs available.
Predicted effect concentrations: No PECs available

EXPOSURE CONTROLS
Appropriate engineering controls:
Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Individual protection measures
Hygiene measures:
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Eye/face protection:
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts.

Skin protection
Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Body protection:
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Other skin protection:
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Respiratory protection:
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Environmental exposure controls:
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

The substance must be handled under strictly controlled conditions as laid out in Article 18 paragraph 4 REACH-regulation. DETAILED information on risk management measures recommended to the user in accordance with Art. 18 paragraph 4 and ECHA REACH Guidance on intermediates (2010), Annex 3 and Practical Guide 16 (2014) is attached to section 13 of the IUCLID dossier.

Stability and reactivity

REACTIVITY
No specific test data related to reactivity available for this product or its ingredients.

CHEMICAL STABILITY
Stable under recommended storage and handling conditions (see section HANDLING AND STORAGE)

POSSIBILITY OF HAZARDOUS REACTIONS
Under normal conditions of storage and use, hazardous reactions will not occur.

CONDITIONS TO AVOID
exposure to heat and moisture

INCOMPATIBLE MATERIALS
oxidizing agents

HAZARDOUS DECOMPOSITION PRODUCTS
Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in chapter 3.5.3 should be consulted for any available use-specific information provided in the Exposure Scenario(s).

WASTE TREATMENT METHODS
Product
Methods of disposal:
The generation of waste should be avoided or minimized wherever possible. Significant quantities of waste product residues should not be disposed of via the foul sewer but processed in a suitable effluent treatment plant. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

Hazardous waste:
The classification of the product may meet the criteria for a hazardous waste.

Packaging
Methods of disposal:
The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.

Special precautions:
This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.