Oleic acid, compound with 2-amino-2-methylpropan-1-ol (1:1)

Genetic toxicity: in vitro

Administrative data

Endpoint:

in vitro gene mutation study in bacteria

Type of information:

experimental study

Adequacy of study:

key study

Study period:

Experimental start date: 17 May 2017. Experimental completion date: 03 July 2017

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2017

Report date:

2017

Materials and methods

Test guideline

Test guideline 1

Qualifier:

according to guideline

Guideline:

OECD Guideline 471 (Bacterial Reverse Mutation Assay)

Deviations:

no

Test guideline 2

Qualifier:

according to guideline

Guideline:

EU Method B.13/14 (Mutagenicity - Reverse Mutation Test Using Bacteria)

Deviations:

no

Test guideline 3

Qualifier:

according to guideline

Guideline:

EPA OPPTS 870.5100 - Bacterial Reverse Mutation Test (August 1998)

Deviations:

no

Test guideline 4

Qualifier:

according to guideline

Guideline:

other: Japanese Ministry of Economy, Trade and Industry, Japanese Ministry of Health, Labour and Welfare and Japanese Ministry of Agriculture, Forestry and Fisheries

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Type of assay:

bacterial reverse mutation assay

Test material

Test material information

Constituent 1

Reference substance name:

Oleic acid, compound with 2-amino-2-methylpropan-1-ol (1:1)

EC Number:

268-793-8

EC Name:

Oleic acid, compound with 2-amino-2-methylpropan-1-ol (1:1)

Cas Number:

68140-41-0

Molecular formula:

C18H34O2.C4H11NO

IUPAC Name:

oleic acid, compound with 2-amino-2-methylpropan-1-ol (1:1)

Test material form:

liquid - solid: mixture of

Specific details on test material used for the study:

Identification: Oleic AMP
CAS No.: 68140-41-0
Physical state/Appearance: Yellow paste
Batch: LAB 4436
Purity: 100%
Expiry Date: 21 February 2018
Storage Conditions: Room temperature in the dark

Method

Target gene:

Histidine locus

Species / strain

Species / strain 1

Species / strain / cell type:

S. typhimurium TA 1535, TA 1537, TA 98 and TA 100

Species / strain 2

Species / strain / cell type:

E. coli WP2 uvr A

Metabolic activation:

with and without

Metabolic activation system:

Phenobarbital/β-naphthaflavone induced rat liver S9 were used as the metabolic activation system

Test concentrations with justification for top dose:

Experiment 1: 1.5, 5, 15, 50, 150, 500, 1500 and 5000 µg/plate. The maximum dose level of the test item in the first experiment was selected as the maximum recommende dose level of 5000 µg/plate.

Experiment 2: 15, 50, 150, 500, 1500 and 5000 µg/plate. There was no visible reduction in the growth of the bacterial background lawn at any dose level, either in the presence or absence of metabolic activation (S9-mix), in the first mutation test (plate incorporation method) and consequently the same maximum dose level was used in the second mutation test.

Vehicle / solvent:

Dimethyl Sulfoxide
The test item was insoluble in sterile distilled water at 50 mg/mL but was fully soluble in dimethyl sulphoxide at the same concentration in solubility checks performed in house. Dimethyl sulphoxide was therefore selected as the vehicle.

Controls

Controls 1

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

Remarks:

DMSO

True negative controls:

no

Positive controls:

yes

Remarks:

2 µg/plate for WP2uvrA 3 µg/plate for TA100 5 µg/plate for TA1535

Positive control substance:

N-ethyl-N-nitro-N-nitrosoguanidine

Remarks:

Without metabolic activation

Controls 2

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

Remarks:

DMSO

True negative controls:

no

Positive controls:

yes

Remarks:

80 µg/plate for TA1537

Positive control substance:

9-aminoacridine

Remarks:

Without metabolic activation

Controls 3

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

Remarks:

DMSO

True negative controls:

no

Positive controls:

yes

Remarks:

0.2 µg/plate for TA98

Positive control substance:

4-nitroquinoline-N-oxide

Remarks:

without metabolic activation

Controls 4

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

Remarks:

DMSO

True negative controls:

no

Positive controls:

yes

Remarks:

1 µg/plate for TA100, 2 µg/plate for TA1535 and TA1537, 10 µg/plate for WP2uvrA

Positive control substance:

other: 2-Aminoanthracene

Remarks:

With metabolic activation

Controls 5

Untreated negative controls:

yes

Negative solvent / vehicle controls:

yes

Remarks:

DMSO

True negative controls:

no

Positive controls:

yes

Remarks:

5 µg/plate for TA98

Positive control substance:

benzo(a)pyrene

Remarks:

with metabolic activation

Details on test system and experimental conditions:

Test Item Preparation and Analysis
The test item was accurately weighed and approximate half-log dilutions prepared in dimethyl sulphoxide by mixing on a vortex mixer and sonication for 5 minutes at 40 °C on the day of each experiment. No correction for purity was required. Prior to use, the solvent was dried to remove water using molecular sieves i.e. 2 mm sodium alumino silicate pellets with a nominal pore diameter of 4E-4 microns.
All formulations were used within four hours of preparation and were assumed to be stable for this period. Analysis for concentration, homogeneity and stability of the test item formulations is not a requirement of the test guidelines and was, therefore, not determined. This is an exception with regard to GLP and has been reflected in the GLP compliance statement.

Test for Mutagenicity: Experiment 1 - Plate Incorporation Method
Dose selection
The test item was tested using the following method. The maximum concentration was 5000 µg/plate (the maximum recommended dose level). Eight concentrations of the test item (1.5, 5, 15, 50, 150, 500, 1500 and 5000 µg/plate) were assayed in triplicate against each tester strain, using the direct plate incorporation method.
Without Metabolic Activation
0.1 mL of the appropriate concentration of test item, solvent vehicle or appropriate positive control was added together with 0.1 mL of one of the bacterial strain cultures and 0.5 mL of phosphate buffer to 2 mL of molten, trace amino-acid supplemented media. These were then mixed and overlayed onto a Vogel Bonner agar plate. Negative (untreated) controls were also performed on the same day as the mutation test. Each concentration of the test item, appropriate positive, vehicle and negative controls, and each bacterial strain, was assayed using triplicate plates.
With Metabolic Activation
The procedure was the same as described previously except that following the addition of the test item formulation and bacterial culture, 0.5 mL of S9 mix was added to the molten, trace amino-acid supplemented media instead of phosphate buffer.
Incubation and Scoring
All of the plates were incubated at 37 ± 3 C for approximately 48 hours and scored for the presence of revertant colonies using an automated colony counting system. The plates were viewed microscopically for evidence of thinning (toxicity).

Test for Mutagenicity: Experiment 2 – Pre-Incubation Method
As the result of Experiment 1 was deemed negative, Experiment 2 was performed using the pre-incubation method in the presence and absence of metabolic activation.
Dose selection
The dose range used for Experiment 2 was determined by the results of Experiment 1 and was 15, 50, 150, 500, 1500 and 5000 µg/plate.
Six test item dose levels per bacterial strain were selected in the second mutation test in order to achieve both a minimum of four non-toxic dose levels and the toxic limit of the test item following the change in test methodology from plate incorporation to pre-incubation.
Without Metabolic Activation
0.1 mL of the appropriate bacterial strain culture, 0.5 mL of phosphate buffer and 0.1 mL of the test item formulation, solvent vehicle or 0.1 mL of appropriate positive control were incubated at 37 ± 3 °C for 20 minutes (with shaking) prior to addition of 2 mL of molten, trace amino-acid supplemented media and subsequent plating onto Vogel Bonner plates. Negative (untreated) controls were also performed on the same day as the mutation test employing the plate incorporation method. All testing for this experiment was performed in triplicate.
With Metabolic Activation
The procedure was the same as described previously except that following the addition of the test item formulation and bacterial strain culture, 0.5 mL of S9 mix was added to the tube instead of phosphate buffer, prior to incubation at 37 ± 3 °C for 20 minutes (with shaking) and addition of molten, trace amino-acid supplemented media. All testing for this experiment was performed in triplicate.
Incubation and Scoring
All of the plates were incubated at 37 ± 3 °C for approximately 48 hours and scored for the presence of revertant colonies using an automated colony counting system. The plates were viewed microscopically for evidence of thinning (toxicity).

Evaluation criteria:

Evaluation Criteria
There are several criteria for determining a positive result. Any, one, or all of the following can be used to determine the overall result of the study:
1. A dose-related increase in mutant frequency over the dose range tested (De Serres and Shelby, 1979).
2. A reproducible increase at one or more concentrations.
3. Biological relevance against in-house historical control ranges.
4. Statistical analysis of data as determined by UKEMS (Mahon et al., 1989).
5. Fold increase greater than two times the concurrent solvent control for any tester strain (especially if accompanied by an out of historical range response (Cariello and Piegorsch, 1996)).
A test item will be considered non-mutagenic (negative) in the test system if the above criteria are not met.

Statistics:

Statistical significance was confirmed by using Dunnetts Regression Analysis (* = p < 0.05) for those values that indicate statistically significant increases in the frequency of revertant colonies compared to the concurrent solvent control.

Results and discussion

Test results

Test results 1

Key result

Species / strain:

S. typhimurium TA 1535

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Test results 2

Key result

Species / strain:

S. typhimurium TA 1537

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Test results 3

Key result

Species / strain:

S. typhimurium TA 98

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Test results 4

Key result

Species / strain:

S. typhimurium TA 100

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Test results 5

Key result

Species / strain:

E. coli WP2 uvr A

Metabolic activation:

with and without

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

no cytotoxicity

Vehicle controls validity:

valid

Untreated negative controls validity:

valid

Positive controls validity:

valid

Additional information on results:

Prior to use, the master strains were checked for characteristics, viability and spontaneous reversion rate (all were found to be satisfactory). The amino acid supplemented top agar and the S9-mix used in both experiments was shown to be sterile. The test item formulation was also shown to be sterile. These data are not given in the report.
Results for the negative controls (spontaneous mutation rates) were considered to be acceptable.
The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated.
The maximum dose level of the test item in the first experiment was selected as the maximum recommended dose level of 5000 µg/plate. There was no visible reduction in the growth of the bacterial background lawn at any dose level, either in the presence or absence of metabolic activation (S9-mix), in the first mutation test (plate incorporation method) and consequently the same maximum dose level was used in the second mutation test. Similarly, there was no visible reduction in the growth of the bacterial background lawn at any dose level, either in the presence or absence of metabolic activation (S9-mix), in the second mutation test (pre-incubation method).
A test item film (creamy in appearance) was noted at 5000 µg/plate, this observation did not prevent the scoring of revertant colonies.
There were no increases in the frequency of revertant colonies recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9-mix), in Experiment 1 (plate incorporation method). Similarly, no increases in the frequency of revertant colonies were recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9-mix), in Experiment 2 (pre incubation method).

Applicant's summary and conclusion

Conclusions:

Oleic AMP was considered to be non-mutagenic under the conditions of this test.

Executive summary:

 Introduction

The test method was designed to be compatible with the guidelines for bacterial mutagenicity testing published by the major Japanese Regulatory Authorities including METI, MHLW and MAFF, the OECD Guidelines for Testing of Chemicals No. 471 "Bacterial Reverse Mutation Test", Method B13/14 of Commission Regulation (EC) number 440/2008 of 30 May 2008 and the USA, EPA OCSPP harmonized guideline - Bacterial Reverse Mutation Test.

Methods

Salmonella typhimuriumstrains TA1535, TA1537, TA98 and TA100 andEscherichia colistrain WP2uvrAwere treated with the test item using both the Ames plate incorporation and pre-incubation methods at eight dose levels, in triplicate, both with and without the addition of a rat liver homogenate metabolizing system (10% liver S9 in standard co-factors). The dose range for Experiment 1 was predetermined and was 1.5 to 5000 mg/plate. The experiment was repeated on a separate day (pre-incubation method) using fresh cultures of the bacterial strains and fresh test item formulations. The dose range was amended, following the results of Experiment 1, and was 15 to 5000 µg/plate. Six test item concentrations were selected in Experiment 2 in order to achieve both four non‑toxic dose levels and the potential toxic limit of the test item following the change in test methodology.

  Results

The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated.

The maximum dose level of the test item in the first experiment was selected as the maximum recommended dose level of 5000 µg/plate. There was no visible reduction in the growth of the bacterial background lawn at any dose level, either in the presence or absence of metabolic activation (S9-mix), in the first mutation test (plate incorporation method) and consequently the same maximum dose level was used in the second mutation test. Similarly, there was no visible reduction in the growth of the bacterial background lawn at any dose level, either in the presence or absence of metabolic activation (S9-mix), in the second mutation test (pre-incubation method). A test item film (creamy in appearance) was noted at 5000 mg/plate, this observation did not prevent the scoring of revertant colonies.

There were no increases in the frequency of revertant colonies recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9-mix), in Experiment 1 (plate incorporation method). Similarly, no increases in the frequency of revertant colonies were recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9-mix), in Experiment 2 (pre‑incubation method). 

Conclusion

Oleic AMP was considered to be non-mutagenic under the conditions of this test.

NOTE: Any of data in this dataset are disseminated by the European Union on a right-to-know basis and this is not a publication in the same sense as a book or an article in a journal. The right of ownership in any part of this information is reserved by the data owner(s). The use of this information for any other, e.g. commercial purpose is strictly reserved to the data owners and those persons or legal entities having paid the respective access fee for the intended purpose.