Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
15 Mar 2016 to 25 Mar 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 105 (Water Solubility)
GLP compliance:
yes (incl. QA statement)
Remarks:
Swiss Federal Office for the Environment
Type of method:
flask method
Key result
Water solubility:
18 g/L
Loading of aqueous phase:
40 g/L
Temp.:
20 °C
pH:
3.7

Results

 The tabulated values (see Table 1) represent rounded results, obtained by calculation using the exact raw data. Based on the chromatographic data, the test item was considered to be stable during the test.

Table 1: Results of the Water Solubility of the test item  

Sample

No.

Shaking

time at 30°C

[hours]

Measured

concentration

[mg/L]

Sample

Preparation

Factor

F

Concentration

of test Item

Determined

[g/L]

Water

Solubility

Mean

Value

[g/L]

Overall

Mean ±

Std. Dev.

[g/L]

Rel. Std.

Dev.

[%]

1

72

1.76

10000

1.76

17.8

18.0 +/-0.3

+/- 2%

2

72

1.79

10000

1.79

3

48

1.78

10000

1.78

17.9

4

48

1.81

10000

1.81

5

24

1.87

10000

1.87

18.4

6

24

1.81

10000

1.81

 

According to the test guideline, the result found after an incubation time of 72 hours should not exceed by more than 15 % the result found after an incubation time of 48 hours. Thus, the acceptance criterium was fulfilled and the saturation was achieved after 24 hours. Therefore, the study is valid. The R² fits of the calibration curve used was 0.9996. This reflects the linearity of the analytical system within the calibration range of 0.674 to 2.83 mg test item /L.

Conclusion

During this study, the water solubility of the test was determined at 20°C at a mean pH value of 3.7 using the shake flask method. The water solubility was found to be 18.0 g/L ± 0.3 g/L.

Conclusions:
A water solubility value of 18.0 +/- 0.3 g/L (at 20 °C, pH = 3.7) was determined for the test substance according to OECD 105.

Description of key information

Water solubility: 18.0 +/- 0.3 g/L at 20 °C, pH = 3.7 (OECD 105)

Key value for chemical safety assessment

Water solubility:
18 g/L
at the temperature of:
20 °C

Additional information