Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
General advice:
Seek medical advice in case of symptoms caused by eye or skin contact, inhalation or swallowing.
If inhaled:
Move to fresh air.
In case of skin contact:
Remove contaminated or saturated clothing.
Wash off with plenty of water.
In case of eye contact:
Rinse thoroughly with plenty of water, also under the eyelids.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms:
To the best of our knowledge, experiences about acute sys-temic health effects in human beings are not available.

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media:
Water spray, foam, CO2, dry powder.
Unsuitable extinguishing media:
High volume water jet
5.2 Special hazards arising from the substance or mixture
Hazardous combustion products:
Nitrogen oxides (NOx)
Ammonia
5.3 Advice for firefighters
Special protective equipment for firefighters:
In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear personal protective equipment; see section 8.
Ensure adequate ventilation.
Avoid dust formation.
6.2 Environmental precautions
Environmental precautions:
Product or extinguishing water with product must not be al-lowed to enter soil, sewers or natural bodies of water.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up:
Remove all sources of ignition.
Use mechanical handling equipment.
Avoid dust formation.
Keep in suitable, closed containers for disposal.

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling:
Handle in accordance with good industrial hygiene and safety practice.
Provide sufficient ventilation and exhaust at the workplace.
Avoid dust formation.
Do not allow accumulation of dust.
Advice on protection against fire and explosion:
Avoid formation of air-dust mixtures and keep away from igni-tion sources (sparks, flames, open flame) to prevent dust ex-plosions. Take precautionary measures against static dis-charges.
Hygiene measures:
Do not breathe dust. Avoid contact with skin, eyes and cloth-ing. Take off clothing and shoes contaminated with product. Clean before reuse. Wash hands before breaks and at the end of workday. Do not eat, drink or smoke during use. Keep away from food, drink and animal feedingstuffs.
Dust explosion class: St1
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Do not store together with: oxidizing agents Keep tightly closed in a dry and cool place. Protect from effects of warmth and heat

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Eye protection:
Safety glasses
Hand protection
Material:
Chloroprene, Recommendation: Camapren 722
Break through time:480 min
Glove thickness:0,6 mm
Skin and body protection:
Protective clothing
Respiratory protection:
Use suitable respiratory protection in the presence of dust.
Recommendation: Dust mask FFP3 or P3 particle filter

Stability and reactivity

10.1 Reactivity
See section 10.3
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions:
No hazardous reactions are known if properly handled and stored.
10.4 Conditions to avoid
Conditions to avoid:> 80 °C
Keep away from sources of heat, flames and sparks.
10.5 Incompatible materials
Materials to avoid:
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. see section 5

Disposal considerations

13.1 Waste treatment methods
Product:
Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.
Contaminated packaging:
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.