Registration Dossier

Administrative data

First-aid measures

General Advice Get medical attention immediately if symptoms occur. Show this safety data sheet to the doctor in attendance.


Inhalation: IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.
If breathing is difficult, give oxygen.

Skin contact: Wash off immediately with soap and plenty of water. If a person feels unwell or
symptom of skin irritation appear, consult a physician.

Eye contact: Rinse immediately carefully and thoroughly with eye-bath or water. If eye irritation persists, consult a specialist.

Ingestion: If swallowed, seek medical advice immediately and show this SDS or label. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Protection of first-aiders: Avoid contact with skin and eyes.

Most Important Symptoms and Effects May cause allergic skin reaction

Notes to physician Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media: Carbon dioxide (CO2)
Dry powder
Dry sand
Alcohol-resistant foam
Use water spray or fog; do not use straight streams

Extinguishing media which must not be used for safety reasons: None

Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases: None in particular

Unusual Fire and Explosion Hazards: May emit toxic fumes under fire conditions

Hazardous combustion products: Carbon monoxide
Carbon dioxide (CO2)

Advice for fire-fighters

Special protective equipment for fire-fighters: Wear self contained breathing apparatus for fire fighting if necessary

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions: Keep people away from and upwind of spill/leak. Use personal protective equipment.

Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system.

Clean-up methods: Soak up with inert absorbent material and dispose of as hazardous waste. Sweep up and
shovel into suitable containers for disposal. Clean contaminated surface thoroughly.
Prevent product from entering drains. Local authorities should be advised if significant spillages cannot be contained.

Handling and storage

Handling: Avoid contact with skin, eyes and clothing. Avoid breathing mists, dusts, or vapors.
Wash hands thoroughly after handling.

Storage: Keep containers tightly closed in a cool, well-ventilated place. Keep product and empty container a way from heat and sources of ignition. Keep at temperatures above 5 °C.

Additional Storage: Suitable material: Carbon steel
Stainless steel
Plastic drum

Transport information

Land transport (ADR/RID)

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s (Propyleneglycol monolaurate)
Chemical name:
Propylene glycol monolaurate
Language:
English
Class:
9
Packaging group:
III
Labels:
9
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s (Propyleneglycol monolaurate)
Chemical name:
Propylene glycol monolaurate
Class:
9
Packaging group:
III
EmS code:
F-A, S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s (Propyleneglycol monolaurate)
Chemical name:
Propyleneglycol monolaurate
Class:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls

Engineering measures: Maintain adequate engineering controls and/or ventilation to keep hazardous ingredients below their statutory limits. Use an approved respirator whenever exposure limits are exceeded

Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice

Personal protective equipment

Eye protection: Safety glasses

Hand protection: Protective gloves, Neoprene gloves. The determined penetration times according to EN 374 part III are not performed under practical conditions.
Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.

Skin and body protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place

Respiratory protection: In case of insufficient ventilation wear suitable respiratory equipment.

Environmental Exposure: No information available
Controls

Stability and reactivity

Reactivity: No dangerous reaction known under conditions of normal use

Stability: Stable under recommended storage conditions

Possibility of hazardous reactions: None known

Conditions to avoid: Heat, flames and spaks

Incompatible Materials: Oxidising agent

Hazardous decomposition products: None reasonably foreseeable

Disposal considerations

Waste from residues / unused products: Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of in accordance with federal, state and local regulations.

EWC waste disposal No: According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.

Further Information: Waste codes should be assigned by the user based on the application for which the product was used

Contaminated packaging: Empty containers should be taken to local recyclers for disposal