Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 916-461-4 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General information
Remove/Take off immediately all contaminated clothing.
Ensure that the First Aid Personnel are aware of the product involved, and take precautions to protect themselves (e.g. wear personal protection equipment).
After inhalation
If inhaled, remove to fresh air.
After contact with skin
After contact with skin, wash immediately with plenty of soap and water.
After contact with eyes
Rinse immediately with plenty of water and seek medical advice.
After ingestion
If swallowed, call a poison control centre or doctor immediately.
Treat symptomatically.
Most important symptoms and effects, both acute and delayed
Symptoms
The possible symptoms known are those derived from the labelling
Hazards
No additional hazards are known except those derived from the labelling.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media
all
Extinguishing media that must not be used for safety reasons
No restrictions
Special hazards arising from the substance or mixture
Carbon oxides
Sulphur oxides
Advice for firefighters
Special protective equipment for firefighting
Self-contained breathing apparatus
Full protective suit
Further information
Not combustible.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear suitable protective equipment.
Ventilate the area.
Environmental precautions
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
The product should not be allowed to enter drains, water courses or the soil
Methods and material for containment and cleaning up
After processing, clean all equipment with the following:
Water
Additional information
Take up as such and consider recycling.
Do not let the liquid drain into rivers, ponds or sewer systems.
Handling and storage
Precautions for safe handling
Advice on safe handling
No special measures necessary.
Hygiene measures
Wash hands before breaks and at the end of workday.
Use protective skin cream before handling the product.
Take off immediately all contaminated clothing and wash it before reuse.
Do not eat, drink or smoke when using this product.
Observe the usual precautions for handling chemicals.
Advice on protection against fire and explosion
No special measures necessary.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
Keep only in the original container.
Advice on storage compatibility
Avoid storage near incompatibile agents.
Do not store or transport together with foodstuffs
Further information on storage conditions
Keep containers tightly closed in a cool, well-ventilated place.
Handle and open container with care.
Do not freeze.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
General protective measures
Avoid contact with skin and eyes.
Respiratory protection : Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Hand protection : Chemical resistant gloves
Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Solvent-resistant gloves (butyl-rubber)
Minimum breakthrough time / gloves : >= 8 h
Minimum thickness / gloves 0,5 mm
Fluorinated rubber gloves
Minimum breakthrough time / gloves : >= 8 h
Minimum thickness / gloves 0,5 mm
Eye protection : Safety goggles
Body protection : working clothes
Stability and reactivity
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
None known.
Incompatible materials
not known
Hazardous decomposition products
When used and handled as intended, none.
Disposal considerations
Product: dispose of in accordance with local regulations.
Uncleaned packaging: consider recycling.
Composition: C; H; Na; O; S
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
