Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General advice:
Remove/Take off immediately all contaminated clothing.
Show this safety data sheet to the doctor in attendance.
In case of skin contact:
In case of contact, immediately flush skin with soap and plenty of water.
In case of eye contact:
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed:
Do NOT induce vomiting.
Get medical attention immediately.

Most important symptoms and effects, both acute and delayed
Symptoms:
The possible symptoms known are those derived from the labelling (see section 2).
Risks:
The possible risks known are those derived from the labelling (see section 2).

Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Water spray jet
Foam
Carbon dioxide (CO2)
Dry powder

Special hazards arising from the substance or mixture
Specific hazards during firefighting:
In case of fire hazardous decomposition products may be produced such as:
Carbon monoxide
Carbon dioxide (CO2)
Nitrogen oxides (NOx)
Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters
Special protective equipment for firefighters:
Self-contained breathing apparatus
Further information:
Wear suitable protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear suitable protective clothing.

Environmental precautions:
Do not empty into drains.

Methods and material for containment and cleaning up
Methods for cleaning up:
Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water.
Can be landfilled or incinerated, when in compliance with local regulations.

Handling and storage

Precautions for safe handling
Advice on safe handling:
No special measures necessary if stored and handled as prescribed.
Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection
Hygiene measures:
Observe the usual precautions for handling chemicals. When using do not eat or drink. Keep away from food and drink. Wash hands before breaks and at the end of workday. Remove/Take off immediately all contaminated clothing.

Conditions for safe storage, including any incompatibilities
Further information on storage conditions:
Protect from extreme heat and cold - Sensitive to frost - at temperatures below +5 °C the product may become turbid with sediment formation. If sediment does form, the product should be homogenized at 40 - 50 °C while stirring.

Specific end use(s)
Specific use(s):
No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International Bulk Chemicals Code):
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Exposure controls
Personal protective equipment
Eye protection:
Safety glasses
Hand protection
Remarks:
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Break through time:
30 min
Glove thickness:
0,4 mm
Remarks:
For short-term exposure (splash protection): Nitrile rubber gloves.
Break through time:
480 min
Glove thickness:
0,7 mm
Remarks:
Long-term exposure Impervious butyl rubber gloves
Skin and body protection:
Lightweight protective clothing
Protective measures:
Avoid contact with skin and eyes.

Stability and reactivity

Reactivity
See section "Possibility of hazardous reactions"

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
Hazardous reactions:
No dangerous reaction known under conditions of normal use.

Conditions to avoid
None known.

Incompatible materials
Materials to avoid:
not known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods
Product:
In accordance with local authority regulations, take to special waste incineration plant

Contaminated packaging:
Regulations concerning reuse or disposal of used packaging materials must be observed.