Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 915-384-3 | CAS number: -
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From May 23, 2017 to May 24, 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Version / remarks:
- only (5)21 N04005.03 was used
- Deviations:
- yes
- Remarks:
- see 'Principles of method if other than guideline'
- Principles of method if other than guideline:
- The Pensky-Martens apparatus cannot be used, because the appearance of the test substance prevents the continuous stirring. Therefore, from the mentioned test methods in A.9 only the test procedure (5)21 N04005.03 was used. In difference to the test method (5)21 N04005.03 the flash point determination was carried out by taking 2 resp. 4 g of the test substance instead of 2 resp. 4 mL.
- GLP compliance:
- yes
- Type of method:
- other: (5)21 N04005.03
- Flash point apparatus:
- Setaflash apparatus
- Key result
- Flash point:
- 98 °C
- Atm. press.:
- 1 013 mBar
- Conclusions:
- Under the study conditions, the test substance shows a flash point at a temperature of 98.0°C (1013 mbar).
- Executive summary:
A study was conducted to determine the flash point of the test substance according to EU Method A.9. The Pensky-Martens apparatus could not be used, because the appearance of the test substance prevents the continuous stirring. Only the test procedure (5)21 N04005.03 was used. In difference to the guideline the flash point determination was carried out by taking 2 resp. 4 g of the test substance instead of 2 resp. 4 mL. Examined temperature range was of -30°C - 300°C by Seta flash 7 as rapid tester. Under the study conditions, the test substance shows a flash point at a temperature of 98.0°C (1013 mbar) (Kintrup, 2017).
Reference
The test substance is a white solid at room temperature.
Description of key information
The flash point was determined according to EU Method A.9 (Kintrup, 2017).
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 98 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
