Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

· Description of first aid measures
· General information:
Personal protection for the First Aider.
Immediately remove any clothing soiled by the product.
Take affected persons out of danger area and lay down.
Position and transport stably in side position.
Artificial respiration with respiration bag or respirator

· After inhalation:
Take affected persons into fresh air and keep quiet.
Seek medical treatment in case of complaints.

· After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.

· After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.

· After swallowing:
Rinse out mouth and then drink plenty of water.
Vomiting, possible danger of aspiration, keep breathing passages free.
Induce vomiting only, if affected person is fully conscious.
Seek medical treatment.

Fire-fighting measures

· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fire with alcohol resistant foam.

· Special hazards arising from the substance or mixture:
-Sulphur oxides (SOx)
-Carbon monoxide and carbon dioxide
-Danger of forming toxic pyrolysis products.

· Special protective equipment:
-Wear fully protective suit.
-Do not inhale explosion gases or combustion gases.
-Self-contained respiratory protective device.

· Additional information:
Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

· Personal precautions, protective equipment and emergency procedures
-Use respiratory protective device against the effects of fumes/dust/aerosol.
-Wear protective equipment. Keep unprotected persons away.
-Keep away from ignition sources.

· Environmental precautions:
-Do not allow to enter sewers/ surface or ground water.

· Methods and material for containment and cleaning up:
-Pick up mechanically.
-Dispose contaminated material as waste according to section "Disposal considerations".
-Ensure adequate ventilation.

· Additional information:
-Store in larger quantities and pump into suitable containers.

Handling and storage

· Handling:
· Precautions for safe handling
-Ensure good ventilation/exhaustion at the workplace.
-Development and deposition of dust has to be avoided.

· Information about fire - and explosion protection:
-no special measures required.

· Storage:
· Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
· Information about storage in one common storage facility:
-Do not store together with strong acids, alkalines and oxidation agents

· Further information about storage conditions:
-Store in cool, dry conditions in well sealed receptacles.
-Store receptacle in a well ventilated area.
-Protect from frost.
-Recommended storage temperature: At 15 °C to 25 °C
-Storage class: according to VCI-Concept: LGK 12 (not flammable liquid)

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

-Additional information about design of technical facilities: see section "Handling and Storage".

-Control parameters: Contains no substances with occupational exposure limit values.

-Additional information: The lists valid during the making were used as basis.

-Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
-Do not inhale gases / fumes / aerosols / dust.
-Immediately remove all soiled and contaminated clothing.
-Avoid contact with the eyes and skin.
-Separate storage of protective clothing

· Respiratory protection:
-Use suitable respiratory protective device in case of insufficient ventilation.
-In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
· Recommended filter device for short term use: Filter A-FFP2
· Protection of hands: Protective gloves
· Material of gloves : Nitrile rubber, NBR
· Breakthrough time of glove material. >= 8 h
The extract breakthrough time is provided by manufacturer of gloves.
- not appropriate materials: leather, thick materials

- Eye protection: Tightly sealed goggles

Stability and reactivity

· Thermal decomposition / conditions to be avoided : No decomposition if used according to specifications.

· Possibility of hazardous reactions
-Reacts with strong acids, alkalines and oxidizing agents.

· Hazardous decomposition products:
-Sulphur oxides (SOx)
-Carbon monoxide and carbon dioxide
-Danger of forming toxic pyrolysis products.

Disposal considerations

· Waste treatment methods
· Recommendation :
Disposal considering to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise.

· Waste disposal key:
Depending on the application intended by the consumer, the allocation of waste codes according to the European waste catalogue has to be carried out in agreement with the waste disposal company and the authority.

· Uncleaned packaging:
· Recommendation : Packagings that may not be cleansed are to be disposed of in the same manner as the product.
· Recommended cleansing agents: Water, if necessary together with cleansing agents.