Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 210-764-9 | CAS number: 623-00-7
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General advice:
Seek medical advice in case of symptoms caused by eye or skin contact, inhalation or swallowing.
The hot molten liquid causes severe damage to the eyes and burns.
If inhaled:
Bring affected person outside and ensure that he/she is com-fortable.
In case of skin contact:
Change contaminated, soaked clothes.
Upon skin contact, wash with plenty of water and soap.
Following contact with hot product, cool quickly with cold wa-ter until pain ceases. Do not remove congealed product from the skin. Consult doctor immediately.
In case of eye contact:
Rinse thoroughly with plenty of water keeping eyelid open.
Remove contact lenses if this can be easily done.
If eye irritation persists, consult a specialist.
If swallowed:
Rinse out mouth, spit out liquid.
Give small amounts of water to drink.
Most important symptoms and effects, both acute and delayed
None known.
Indication of any immediate medical attention and special treatment needed
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
The product itself is not flammable; adapt fire-extinguishing measures to surroundings.
Special hazards arising from the substance or mixture
Specific hazards during fire-fighting:
None known.
Advice for firefighters
Special protective equipment for firefighters:
In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear personal protective equipment; see section "Exposure controls/personal protection".
Ensure adequate ventilation.
Environmental precautions
Methods and material for containment and cleaning up
Methods for cleaning up:
Sweep up and shovel. Avoid dust formation.
Keep in suitable, closed containers for disposal.
Reference to other sections
Handling and storage
Precautions for safe handling
Advice on safe handling:
For professional use only.
Ensure adequate ventilation.
In case of dust being formed, provide for adequate extraction.
Advice on protection against fire and explosion:
When handling hot molten mass:: Vapours can form explosive mixtures with air. Keep away from combustion sources such as sparks, flames and unprotected light sources.
Hygiene measures:
Do not breathe vapours/dust. Avoid contact with skin, eyes and clothing. Remove and wash contaminated clothing before re-use. Wash hands before breaks and immediately after handlig the product. Do not eat, drink or smoke during use. Keep away from food, drink and animal feedingstuffs.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Keep containers tightly closed in a cool, well-ventilated place.
Packaging material:
Suitable material: polyethylene, Polypropylene
Specific end use(s)
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
No limit value known.
Personal protective equipment
Eye protection:
Safety glasses
Hand protection
Material: Nitrile rubber
Break through time: 480 min
Glove thickness: 0,4 mm
Directive: DIN EN 374
Material: Chloroprene
Break through time: 480 min
Glove thickness: 0,6 mm
Directive: DIN EN 374
Skin and body protection: Protective suit
If intensive contact with the hazardous material cannot be avoided with certainty, order (depending on the hazard involved) additional protective measures for example chemical protective suit.
Respiratory protection:
Do not inhale gases, vapours, aerosols or dust - use respiratory protection equipment.
Dust protection mask in accordance with EN 149 FFP2
Stability and reactivity
Reactivity
Chemical stability
No decomposition if stored and applied as directed.
Possibility of hazardous reactions
Hazardous reactions:
No dangerous reactions have been known to occur in con-junction with the proper use to the product.
Conditions to avoid
Conditions to avoid:
No specific hazards are known.
Incompatible materials
Materials to avoid:
Strong oxidizing agents
Strong bases
Hazardous decomposition products
No hazardous decomposition products known.
Disposal considerations
Waste treatment methods
Product:
Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.
Contaminated packaging:
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
