Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures

General advice : Show this safety data sheet to the doctor in attendance.

If inhaled  :If breathed in, move person into fresh air.

If symptoms persist, call a physician.

In case of skin contact :Take off contaminated clothing and shoes immediately.

Wash off with soap and water.

If skin irritation persists, call a physician.

In case of eye contact:Rinse immediately with plenty of water, also under the eyelids, for at least 5 minutes.

Remove contact lenses.

If eye irritation persists, consult a specialist.

If swallowed:If swallowed, rinse mouth with water (only if the person is con-scious).

Call a physician immediately.

4.2 Most important symptoms and effects, both acute and delayed

Symptoms:No information available.

4.3 Indication of any immediate medical attention and special treatment needed

Treatment:Treat symptomatically.

Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media :Water mist

Dry powder


Carbon dioxide (CO2)


Aqueous film forming foam (AFFF).

Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment.

Unsuitable extinguishing media :Water spray jet

5.2 Special hazards arising from the substance or mixture

Specific hazards during fire-fighting :Risk of dust explosion.

Hazardous combustion products :Nitrogen oxides (NOx)

Carbon oxides

Chlorine compounds

5.3 Advice for firefighters

Special protective equipment for firefighters:In the event of fire, wear self-contained breathing apparatus.

Further information:In the event of fire, cool tanks with water spray.

Avoid dust formation.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Personal precautions:Avoid dust formation.

Avoid breathing dust.

Evacuate personnel to safe areas.

Keep away from open flames, hot surfaces and sources of ignition.

6.2 Environmental precautions

Environmental precautions:Should not be released into the environment.

6.3 Methods and material for containment and cleaning up

Methods for cleaning up:Large spills: Sweep up or vacuum with HEPA filter or via wet cleaning into suitable containers for disposal.

Pick up and arrange without creating dust. Keep in properly labelled containers.

Small spills: Moisten a towel, cover the spill, pick up the spill or use HEPA vacuum.

Large spills + Small spills: Keep in suitable, closed containers for disposal. Treat recovered material as described in the sec-tion "Disposal considerations".

Handling and storage

7.1 Precautions for safe handling

Advice on safe handling : Ensure all equipment is electrically grounded before beginning transfer operations.

To avoid thermal decomposition, do not overheat.

Keep away from heat and sources of ignition.

Avoid inhalation, ingestion and contact with skin and eyes.

Use personal protective equipment as required.

Avoid formation of dust and aerosols.

Advice on protection against fire and explosion :Avoid dust formation.

Hygiene measures:Handle in accordance with good industrial hygiene and safety practice.

7.2 Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers :To maintain product quality, do not store in heat or direct sun-light. Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Store at room temperature.

Recommended storage temperature :15 - 25 °C

7.3 Specific end use(s)

Specific use(s):Consult the technical guidelines for the use of this sub-stance/mixture.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.2 Exposure controls

Engineering measures

Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure lev-els below recommended exposure limits.

All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.

Personal protective equipment

Eye protection:Safety glasses with side-shields

Hand protection

Material:Nitrile rubber

Remarks:Take note of the information given by the producer concern-ing permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Impervious gloves

Skin and body protection:closed work clothing

Respiratory protection:Engineering controls should always be the primary method of controlling exposures.

If respiratory protective equipment is needed for certain activi-ties, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances pre-sent.

Use only respiratory protection that conforms to international/ national standards.

Suitable mask with particle filter P3

Protective measures :The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Stability and reactivity

10.1 Reactivity

None reasonably foreseeable.

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

Hazardous reactions:Risk of dust explosion.

10.4 Conditions to avoid

Conditions to avoid:To avoid thermal decomposition, do not overheat.

Heat, flames and sparks.

10.5 Incompatible materials

Materials to avoid:Strong oxidizing agents

10.6 Hazardous decomposition products

Nitrogen oxides (NOx), Carbon oxides, Chlorine

Disposal considerations

13.1 Waste treatment methods

Product :Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.

In accordance with National, Federal, State and Local regula-tions.

Contaminated packaging :Empty containers should be taken to an approved waste han-dling site for recycling or disposal.