Concrete of Spilanthes acmella (oleracea) obtained from flowers by extraction with organic solvent

Vapour pressure

Link to relevant study record(s)

Reference

Reference 1

Endpoint:

vapour pressure

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Study period:

run on 2018-03-12

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

QSAR prediction: The value is not an experimental result, however the QSAR model is recommended by the ECHA guidance document on information requirements, is well documented with regard to validation parameters according to OECD principles. Moreover, the substance is fully characterised towards the applicability domain.

Reason / purpose for cross-reference:

other:

Principles of method if other than guideline:

QSAR estimation

Specific details on test material used for the study:

Input:
SMILE notation: C=C2CCC=C(C)CC[C@@H]1[C@@H]2CC1(C)C
CAS: 87-44-5

Temp.:

25

Vapour pressure:

4.16 Pa

Remarks on result:

other: Mean of Antoine and Grain method)

SMILES : C(=CCCC(C(C(C1(C)C)C2)C1)=C)(C2)C

CHEM   : Bicyclo 7.2.0 undec-4-ene, 4,11,11-trimethyl-8-methylene-,  1R-(1R*,4E,9S*) -

MOL FOR: C15 H24

MOL WT : 204.36

------------------------ SUMMARY MPBPWIN v1.43 --------------------

Vapor Pressure Estimations (25 deg C):

 (Using BP: 256.80 deg C (estimated))

 (MP not used for liquids)

   VP:  0.0314 mm Hg (Antoine Method)

     :  4.19 Pa  (Antoine Method)

   VP:  0.0309 mm Hg (Modified Grain Method)

     :  4.12 Pa  (Modified Grain Method)

   VP:  0.0335 mm Hg (Mackay Method)

     :  4.46 Pa  (Mackay Method)

 Selected VP:  0.0312 mm Hg (Mean of Antoine & Grain methods)

            :  4.16 Pa  (Mean of Antoine & Grain methods)

Reference 2

Endpoint:

vapour pressure

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Study period:

run on 2018-03-12

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

QSAR prediction: The value is not an experimental result, however the QSAR model is recommended by the ECHA guidance document on information requirements, is well documented with regard to validation parameters according to OECD principles. Moreover, the substance is fully characterised towards the applicability domain.

Reason / purpose for cross-reference:

other:

Principles of method if other than guideline:

QSAR estimation

Specific details on test material used for the study:

Input: SMILE notation: CC=CC=CCCC=CC(O)=NCC(C)CC

Temp.:

25 °C

Vapour pressure:

0.001 Pa

Remarks on result:

other: modified Grain method

Experimental Database Structure Match:  no data

SMILES : CC=CC=CCCC=CC(O)=NCC(C)CC

MOL FOR: C15 H25 N1 O1

MOL WT : 235.37

------------------------ SUMMARY MPBPWIN v1.43 --------------------

Vapor Pressure Estimations (25 deg C):

 (Using BP: 345.74 deg C (estimated))

 (MP not used for liquids)

   VP:  2.94E-006 mm Hg (Antoine Method)

     :  0.000391 Pa  (Antoine Method)

   VP:  6.91E-006 mm Hg (Modified Grain Method)

     :  0.000921 Pa  (Modified Grain Method)

   VP:  0.00033 mm Hg (Mackay Method)

     :  0.0439 Pa  (Mackay Method)

 Selected VP:  6.91E-006 mm Hg (Modified Grain Method)

            :  0.000921 Pa (Modified Grain Method)

Conclusions:

The Vapour Pressure for the test substance is estimated to be 0.000921 Pa at 25°C.

Executive summary:

Vapour pressure of the test substance was estimated with the QSAR model MPBPWIN from Episuite.

Reference 3

Endpoint:

vapour pressure

Type of information:

not specified

Adequacy of study:

supporting study

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

data from handbook or collection of data

Justification for type of information:

Data comes from an online compilation using secondary data sources. There is no experimental study reference, however data is cited in the database as peer reviewed, and recommended in ECHA Guidance on information requirements. Therefore it is considered as reliable, but with restrictions due to lack of details.

Reason / purpose for cross-reference:

reference to other study

Qualifier:

equivalent or similar to guideline

Guideline:

OECD Guideline 104 (Vapour Pressure Curve)

Deviations:

not applicable

Principles of method if other than guideline:

no data

Temp.:

25 °C

Vapour pressure:

0 mm Hg

Other results founded:

C18, di-unsaturated single component: 10E-3-10E-5 Pa (OECD Agreed Conclusions) (echemportal)

VP (Pa, 25 deg C) : 0,007653 (EPISuite, MPBPVP v1.43, modified Grain method)

VP (Pa, 25 deg C) :   0,0001157 (EPISuite, exp)

Conclusions:

A vapor pressure value of 8.68x10-7 mm Hg at 25 °C is cited for Palmitic acid.

Executive summary:

The HSDB database provides, as secondary source, some physico-chemical properties.

Reference 4

Endpoint:

vapour pressure

Type of information:

not specified

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

data from handbook or collection of data

Justification for type of information:

Data comes from an online compilation using secondary data sources. There is no experimental study reference, however data is cited in the database as peer reviewed, and recommended in ECHA Guidance on information requirements. Therefore it is considered as reliable, but with restrictions due to lack of details.

Reason / purpose for cross-reference:

reference to other study

Qualifier:

equivalent or similar to guideline

Guideline:

OECD Guideline 104 (Vapour Pressure Curve)

Deviations:

not applicable

Principles of method if other than guideline:

no data

Temp.:

25 °C

Vapour pressure:

0 mm Hg

Other results founded:

VP (Pa, 25 deg C) : 0,007359  (EPISuite, MPBPVP v1.43, modified Grain method)

VP (Pa, 25 deg C) :    0 Pa at 25°C 1 key study

Echa, echemportal: 0,00011719 (EPISuite, exp)

Conclusions:

A vapor pressure value of 3.8X10-7 mm Hg at 25 °C is cited for Palmitic acid.

Executive summary:

The HSDB database provides, as secondary source, some physico-chemical properties.

Reference 5

Endpoint:

vapour pressure

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Study period:

run on 2018-03-12

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

QSAR prediction: The value is not an experimental result, however the QSAR model is recommended by the ECHA guidance document on information requirements, is well documented with regard to validation parameters according to OECD principles. Moreover, the substance is fully characterised towards the applicability domain.

Reason / purpose for cross-reference:

reference to other study

Principles of method if other than guideline:

QSAR estimation

Specific details on test material used for the study:

Input:
SMILE notation: CC=CC=CCCC=CC(=O)NCC(C)C
CAS: 25394-57-4

Temp.:

25 °C

Vapour pressure:

0.001 Pa

Remarks on result:

other: Modified Grain Method

Remarks:

Selected vapour pressure

Experimental Database Structure Match:  no data

SMILES : CC=CC=CCCC=CC(=O)NCC(C)C

MOL FOR: C14 H23 N1 O1

MOL WT : 221.35

------------------------ SUMMARY MPBPWIN v1.43 --------------------

Vapor Pressure Estimations (25 deg C):

 (Using BP: 364.76 deg C (estimated))

 (Using MP: 118.84 deg C (estimated))

   VP:  2.63E-006 mm Hg (Antoine Method)

     :  0.000351 Pa  (Antoine Method)

   VP:  6.91E-006 mm Hg (Modified Grain Method)

     :  0.000921 Pa  (Modified Grain Method)

   VP:  1.39E-005 mm Hg (Mackay Method)

     :  0.00185 Pa  (Mackay Method)

 Selected VP:  6.91E-006 mm Hg (Modified Grain Method)

            :  0.000921 Pa (Modified Grain Method)

Conclusions:

The Vapour Pressure for the test substance is estimated to be 0.000921Pa at 25°C

Executive summary:

Vapour pressure of the test substance was estimated with the QSAR model MPBPWIN from Episuite.

Description of key information

The vapour pressure of the test item was calculated as 790 Pa at 20.0 °C and 922 Pa at 25 °C (interpolation).

Note that the test item is a natural complex substance (NCS). It is a mixture of several constituents. The result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and these values may not represent the major part of the substance.

Key value for chemical safety assessment

Vapour pressure:

922 Pa

at the temperature of:

25 °C

Additional information

A fully reliable experimental study, conducted according to a recognized OECD/EC method and under GLP, is available. Therefore, it is considered as a key study.

The vapour pressure of the test item was measured as 790 Pa at 20.0 °C and 922 Pa at 25 °C.

Note that the test item is a natural complex substance (NCS). It is a mixture of several constituents.

The result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and these values may not represent the major part of the substance. Therefore the result should be considered with caution when used for subsequent assessment (worst case).

For information, five constituents are cited in the substance identity profile (SIP) and in the boundary composition (see point 1.2) as representive of the substance.

VP (at 25°C) of each of these five major constituents were reported below. These data come from literature data or QSAR estimation:

- Spilanthol = 0.000921 Pa (valid QSAR estimation),

- E-Caryophyllene-Beta = 4,1597 Pa (valid QSAR estimation),

- Palmitic acid= 5.066236E-5 Pa (literature data),

- Linoleic acid= 0.000115723496 Pa (literature data),

- Homo-spilanthol= 0.0009212 Pa (valid QSAR estimation),