Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction mass of Terpenes and Terpenoids, turpentine-oil, limonene fraction, 1-methyl-4-(1-methylethenyl)cyclohexene and turpentine-oil beta-pinene fraction terpenes, dimers and Terpenes and Terpenoids, turpentine-oil, limonene fraction, 1-methyl-4-(1-methylethenyl)cyclohexene and turpentine-oil beta-pinene fraction terpenes, trimers
EC number: 947-783-3 | CAS number: -
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 03 May - 30 August 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- closed cup
- Flash point apparatus:
- Setaflash apparatus
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Appearance/physical state: amber coloured liquid
- Batch No.of test material: AN-0400-113
- Expiration date of the lot/batch: 01 January 2019
- Purity: 100%
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Approximately -20°C under nitrogen, in the dark - Key result
- Flash point:
- ca. 166 °C
- Atm. press.:
- 102 kPa
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The flash point of the test substance, Terpenes and Terpenoids, turpentine-oil, limonene fraction, polymers with 1-methyl-4-(1-methylethenyl)cyclohexene and turpentine-oil β-pinene fraction terpenes, was determined to be 166.0 ± 2 °C at an atmospheric pressure of 102.0 pKa.
- Executive summary:
The flash point of the test substance, Terpenes and Terpenoids, turpentine-oil, limonene fraction, polymers with 1 -methyl-4 -(1 -methylethenyl)cyclohexene and turpentine-oil β-pinene fraction terpenes, was determined using a Setaflash 30000 -0 closed cup flash point tester in a process compatible with Method A.9 Flash Point of Commission Regulation (EC) No. 440/2008 of 30 May 2008.
A 2ml aliquot for temperatures up to 100°C or a 4ml aliquot for temperatures above 100°C of test substance was transferred to the sample cup of the Setaflash 30000 -0 tester and then heated and allowed to equilibriate at the set temperature. The test flame was introduced into the sample cup for approximately 2.5 seconds by sliding the cup shutter open and then the vapour was then observed for signs of ignition. The temperature was increased and the test flame re-introduced if no ignition occurred. The process was repeated until it was possible to determine the lowest reproducible temperature at which a flash occurred using a fresh sample. The flash point was corrected for atmospheric pressure via the following equation: Corrected flash point = C + 0.23 (101.325 - p) where C = observed flash point (°C) and P = ambient atmospheric pressure (kPa).
The observed flash point of the test substance was 166.0°C, which when corrected gave a value of 165.8°C at an atmospheric pressure of 102.2 pKa.
Reference
Description of key information
The flash point of the test substance, Terpenes and Terpenoids, turpentine-oil, limonene fraction, polymers with 1 -methyl-4 -(1 -methylethenyl)cyclohexene and turpentine-oilβ-pinene fraction terpenes, was determined using a Setaflash 30000 -0 closed cup flash point tester in a process compatible with Method A.9 Flash Point of Commission Regulation (EC) No. 440/2008 of 30 May 2008.
A 2ml aliquot for temperatures up to 100°C or a 4ml aliquot for temperatures above 100°C of test substance was transferred to the sample cup of the Setaflash 30000 -0 tester and then heated and allowed to equilibriate at the set temperature. The test flame was introduced into the sample cup for approximately 2.5 seconds by sliding the cup shutter open and then the vapour was then observed for signs of ignition. The temperature was increased and the test flame re-introduced if no ignition occurred. The process was repeated until it was possible to determine the lowest reproducible temperature at which a flash occurred using a fresh sample. The flash point was corrected for atmospheric pressure via the following equation: Corrected flash point = C + 0.23 (101.325 - p) where C = observed flash point (°C) and P = ambient atmospheric pressure (kPa).
The observed flash point of the test substance was 166.0°C, which when corrected gave a value of 165.8°C at an atmospheric pressure of 102.2 pKa.
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 166 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
