Reaction mass of 29H,31H-phthalocyaninato(2-)-N29,N30,N31,N32 copper and Copper, [29H,31H-phthalocyaninato(2-)-N29,N30,N31,N32]-, (dimethylamino)methyl derivs.

Endpoint summary

Description of key information

Endpoint	EU Method No	OECD Method No	Result / value
Physical state and appearance	-	-	Substance is a solid at room temperature
Freezing (melting) point	A1	102	The melting temperature was >500°C
Boiling point	A2	103	This endpoint has been exempted and test did not have to be conducted as the test substance was found to have a melting point > 300°C
Density (specific gravity)	A3	109	Relative density: 1.234 (1234 kg m-3 at 20°C)
Vapour pressure	A4	104	The test did not have to be conducted   as the test substance was found to have a melting point > 300°C
Partition coefficient	A8	117	The log Pow of this substance could not be determined by the HPLC method
Water solubility	-	105	< 0.17 mg/L (mean value) at 20°C
Flash point	-	-	The test did not have to be conducted as it is relevant only for liquids and low melting point solids
Auto flammability	A16	-	The relative self-ignition temperature of the test substance was found to be 218°C
Granulometry		ISO 13320:2009 CIPAC MT187 OECD Guideline 110	Analysis using dry powder module average showed the following results (μm) 10% of material is < 8.551 50% of material is < 75.028 90% of material is < 263.823 By volume of sample was seen to be < 10.00 μm:  11.89%
Flammability	A10		The substance is considered not to be highly flammable.
Surface tension	A5	115	67.7 mN/m
Explosiveness	The explosive properties test was not conducted, as the substance was determined not to have explosive properties on the basis of an assessment of the structure.
Oxidising properties	The oxidising properties test was not conducted, as the substance was determined not to have oxidising properties on the basis of an assessment of the structure.