Registration Dossier

Administrative data

First-aid measures

Description of first aid
General advice
See a doctor. View the safety data sheet to the treating physician.
In case of inhalation:
In case of inhalation, transport the person out of the contaminated area. In case of respiratory arrest,
practice artificial respiration. See a doctor.
In case of skin contact:
Wash with soap and plenty of water. See a doctor.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a doctor.
If swallowed:
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a doctor

Most important symptoms and effects, both acute and delayed
The main known symptoms and effects on labeling (see section 2.2) and / or section 11

Indication of persons in need of immediate medical care and special treatment
Data not available

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Spray water or use alcohol-resistant foam, dry powder or carbon dioxide carbon.

Special hazards arising from the substance or mixture
Data not available

Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.

Additional information
Data not available

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use individual protective gear. Avoid dust formation. Avoid breathing
vapors, spray mists or gases. Provide adequate ventilation. Evacuate
personnel to safe places. Avoid inhalation of dust.
Personal protective equipment, see section 8.

Precautions for the protection of the environment
Avoid further spills or leaks, if this is possible safely. Prevent
product to enter sewers. All littering must be avoided in the environment.

Methods and material for containment and cleaning
Pick up and evacuate without creating dust. Sweep and shovel. Keep in
suitable and closed containers for disposal.

Reference to other sections
For disposal, see section 13

Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide adequate ventilation where dust is formed for fire protection.
For precautions, see section 2.2

Conditions for safe storage, including any incompatibilities
Store in a cool place. Keep container tightly closed in a dry and well-ventilated place.

Specific end use (s)
Except for the uses mentioned in section 1.2, no other specific use is planned

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate technical controls
Handle in accordance with good industrial hygiene and safety practice. himself
Wash hands before breaks and at the end of the work day.
Individual protection equipment
Eye / face protection
Safety glasses with side shields in accordance with EN166Use equipment of
eye protection, tested and approved in accordance with applicable government standards, such as
NIOSH (US) or EN 166 (EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use a
appropriate glove removal technique to prevent skin contact with the product
(i.e. without touching the outer surface of the glove). Discard contaminated gloves after use
in accordance with applicable laws and good laboratory practices. Wash and dry
The selected protective gloves must meet the specifications of the EU Directive
89/686 / EEC and the standard EN 374 derived from it.
Total contact
Material: Fluorinated rubber
minimum thickness: 0.7 mm
breaking time: 480 min
Tested material: Vitoject® (KCL 890 / Aldrich Z677698, Size M)
Splash contact
Material: Fluorinated rubber
minimum thickness: 0.7 mm
breaking time: 480 min
Tested material: Vitoject® (KCL 890 / Aldrich Z677698, Size M)
Data source: KCL GmbH, D-36124 Eichenzell, Phone +49 (0) 6659 87300, e-mail, Test method: EN374
In case of use in solution or in mixture with other substances, and under conditions
which differ from standard EN 374, contact the supplier of CE approved gloves. This
The recommendation is purely advisory and must be evaluated by a health officer and
safety, familiar with the specific situation of the intended use by our customers. This must not
not be interpreted as an endorsement in any usage scenario.
Body protection
Complete suit of protection against chemicals, The type of equipment of
protection must be selected according to the concentration and quantity of the substance
dangerous at the workplace.
Respiratory protection
In case of exposure nuisance, use a respirator with particle filter type P95 (US)
or type P1 (EU EN 143). For a higher level of protection, use cartridges
type OV / AG / P99 (US) or type ABEK-P2 (EU EN 143).
Use equipment that has been tested and approved by standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Avoid further spills or leaks, if this is possible safely. Prevent
the product to enter the sewers. All littering must be avoided in the environment.

Stability and reactivity

10.1 Reactivity
Data not available
10.2 Chemical stability
Stable under the recommended storage conditions.
10.3 Possibility of hazardous reactions
Data not available
10.4 Conditions to avoid
Data not available
10.5 Incompatible materials
Strong oxidizers, acids
10.6 Hazardous decomposition products
Hazardous decomposition products are formed under fire conditions. - Carbon oxides, Chloride
of gaseous hydrogen
Other decomposition products - no data available
In case of fire: see section 5

Disposal considerations

13.1 Waste treatment methods

Return surplus and non-recyclable solutions to a waste disposal company
authorized. Contact a company specializing in waste disposal for
dispose of this product. Dissolve or mix the product with a combustible solvent and
burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.