Registration Dossier

Administrative data

First-aid measures

Description of first aid measures General information: Immediately remove any clothing soiled by the product.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing: If symptoms persist consult doctor.
Eyes: Dust may irritate eyes mechanically.
Possible routes of intake: Intake by swallowing or inhalation of dust.

Fire-fighting measures

Extinguishing media Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: No restriction in large fires.
Special hazards arising from the substance or mixture: The possibility of formation of explosive dust/air mixtures under certain conditions should be basically considered during handling and processing.
In case of fire, the following can be released:
Carbon monoxide (CO)
Nitrogen oxides (NOx)
Hydrogen chloride (HCl)
Advice for firefighters
Protective equipment: Wear self-contained respiratory protective device.
Chemical resistant protective suit.
Under the protective suit a fire protective suit according to EN 469 should be applied.

Accidental release measures

Personal precautions, protective equipment and emergency procedures Wear protective clothing.
Avoid contact with eyes and skin and clothes.Do not breathe dust.
Access only for trained personnel with personal protective equipment.
Use respiratory protective device against the effects of fumes/dust/ aerosol.
Avoid spillage of product into the environment.
Avoid formation of dust.
Implementation of further measures based on existing emergency plans.
Environmental precautions: Keep contaminated washing water and dispose of appropriately.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Methods and material for containment and cleaning up: Pick up mechanically. If formation of dust cannot be avoided use respiratory filter device.
Reference to other sections: Discharge into waste water channels and biological treatment plants only after clearance with the operating company and in accordance with local Authority approval.

Handling and storage

Precautions for safe handling: Empty containers must not be used for other products.
Contaminated protective equipment should be cleaned before taking it off.
Ensure good ventilation/exhaustion at the workplace.
Fill only in dedicated and assigned containers.
Keep containers tightly sealed.
Information about fire - and explosion protection: No special measures required.
Conditions for safe storage, including any incompatibilities:
Storage
Requirements to be met by storerooms and
receptacles: Store in a cool location.
Corrosion of metals: Test method according to CLP is not applicable (solid material at 55°C).
It should generally be borne in mind that there is a possibility of corrosion on contact with this material. Resistance should be checked in each individual case.
Information about storage in one common storage facility: Store away from oxidising agents.

Transport information

Land transport (ADR/RID)

UN number:
Not classified as dangerous for transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified as dangerous for transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as dangerous for transport.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as dangerous for transport.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This product is exclusively dedicated for the application as on-site isolated intermediate under strictly controlled conditions according to Article 17 of Regulation EC 1907/2006 (REACH-Regulation).
Personal protective equipment General protective and hygienic measures: Contaminated protective suit shall be cleaned before taking it off.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Respiratory protection:
Particle fi lter. The fi lter grade (P1 - P3) has to be established depending on work-place related limit values and the actual exposition.
Protection of hands: Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
For the permanent contact gloves made of the following materials are suitable: The following materials are known from experience to be suitable for protection against undissolved solids: rubber.
Eye protection:Safety glasses
Body protection: Necessary protective suit has to be selected individually based on risk assessment.
Protection against thermal hazards: No specific measures required.
Limitation and supervision of exposure into the environment: Avoid spillage of product into the environment.
If possible use this material only in closed systems and devices. In case of open plant systems (sampling devices, filling and discharging, cleansing works etc.) use local exhaust and collecting trays. Follow emission limit values. Measures in case of unwanted emissions should be established.
Risk management measures: General protective and hygienic measures have to be observed.
Handling and use of this material/formulation only under controlled conditions in closed systems.
Employees who use this material/formulation must be trained and demonstrably instructed about possible risks for man and environment.
Measures for prevention of hazards in case of unwanted leakage shall be implemented.

Stability and reactivity

Thermal decomposition / conditions to be avoided: In order to avoid a possible deflagration the following conditions have to be followed:
- Avoid hotspots in all apparatus
- Avoid friction
- Avoid loose metal parts that may be heated by friction
- Avoid impurities that may lower the meltíng point
Possibility of hazardous reactions: The possibility of formation of explosive dust/air mixtures under certain conditions should be principally considered during handling and processing.
Incompatible materials: Strong oxidizing agents.
Hazardous decomposition products: Carbon monoxide
Nitrogen oxides
Hydrogen chloride (HCl)
Carbon monoxide and carbon dioxide

Disposal considerations

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must be specially treated adhering to official regulations.
If possible recovery or recycling.
Uncleaned packaging
Recommendation: Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning.
Contaminated containers or containers with residual amounts must be treated as hazardous wastes.
Appropriate disposal: Empty container completely.
Storage in a safe place after emptying.
Biological waste water treatment: Discharge into waste water channels and biological treatment plants only after clearence with the operating company and in accordance with local Authority approval.