Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

As a general rule, in case of doubt or if symptoms persist, always call a doctor. NEVER induce swallowing by an unconscious person.
.1. Description of first aid measures
In the event of exposure by inhalation :
If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor. Stop breathing in and out of the contaminated area.
In the event of splashes or contact with eyes :
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Regardless of the initial state, refer the patient to an ophthalmologist and show him the label. If there is any redness, pain or visual impairment,
consult an ophthalmologist.
In the event of splashes or contact with skin :
Watch out for any remaining product between skin and clothing, watches, shoes, etc.
In the event of swallowing :
Do not give the patient anything orally.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor.
Seek medical attention immediately, showing the label

Fire-fighting measures

.1. Extinguishing media
Suitable methods of extinction
In the event of a fire, use :
All means of extinstion can be used.
Unsuitable methods of extinction In the event of a fire, do not use : Strong water jet
.2. Special hazards arising from the substance or mixture
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke.
In the event of a fire, the following may be formed :
- carbon monoxide (CO)
- carbon dioxide (CO2)
- nitrogen oxide (NO)
- nitrogen dioxide (NO2)
- hydrogen chloride (HCl)
- Chlorine compounds
.3. Advice for firefighters
Due to the toxicity of the gas emitted on thermal decomposition of the products,
fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
Consult the safety measures listed under sections "Handling and Storage" and " Exposure controls / Personal protection".
For non first aid worker
Avoid any contact with the skin and eyes. Evacuate personnel in the danger zone.
For first aid worker
First aid workers will be equipped with suitable personal protective equipment (See section "Exposure controls / Personal Protection").
.2. Environmental precautions
Prevent any material from entering drains or waterways.
.3. Methods and material for containment and cleaning up
Retrieve the product by mechanical means (sweeping/vacuuming) : do not generate dust.

Handling and storage

Requirements relating to storage premises apply to all facilities where the substance is handled.
.1. Precautions for safe handling
Always wash hands after handling.
Remove and wash contaminated clothing before re-using.
Provide emergency showers and eye wash stations will be required in facilities where the substance is handled constantly.
Fire prevention :
Prevent access by unauthorised personnel.
Recommended equipment and procedures :
For personal protection, see section "Exposure controls / Personal Protection".
Observe precautions stated on label and also industrial safety regulations. Avoid eye contact with this substance at all times.
Prohibited equipment and procedures :
No smoking, eating or drinking in areas where the substance is used.
.2. Conditions for safe storage, including any incompatibilities
Keep away from heat shelters.
Keep away from moistures shelters.
Always keep in packaging made of an identical material to the original. Unsuitable packaging materials :
- Unprotected metal

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Exempt from transport classification and labelling.
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and
ICAO/IATA for air transport (ADR2015 - IMDG 2014 - ICAO/IATA 2015).

Exposure controls / personal protection

1. Exposure controls
Personal protection measures, such as personal protective equipment.
Pictogram(s) indicating the obligation of wearing personal protective equipment (PPE) : protective gloves and Protective glasses.

Use personal protective equipment that is clean and has been properly maintained. Store personal protective equipment in a clean place,
away from the work area.
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is adequate ventilation,
especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Before handling powders or dust emission, wear mask goggles in accordance with standard EN166. Prescription glasses are not considered as protection.
Provide eyewash stations in facilities where the product is handled constantly.
- Hand protection
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374.
Gloves must be selected according to the application and duration of use at the workstation.
Protective gloves need to be selected according to their suitability for the workstation in question :
other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.
- Body protection
Work clothing worn by personnel shall be laundered regularly.
After contact with the product, all parts of the body that have been soiled must be washed.
- Respiratory protection
Avoid breathing dust.
Wear a disposable half-mask dust filter in accordance with standard EN149.

Stability and reactivity

1. Chemical stability
This substance is stable under the recommended handling and storage conditions in section "Handling and storage".
2. Conditions to avoid
Avoid :
- formation of dusts
Dusts can form an explosive mixture with air.
3. Incompatible materials
Keep away from :
- water
- alkalis
- metals - Slow corrosion
4. Hazardous decomposition products
The thermal decomposition may release/form :
- carbon monoxide (CO)
- carbon dioxide (CO2)
- nitrogen oxide (NO)
- nitrogen dioxide (NO2)
- hydrogen chloride (HCl)

Disposal considerations

Proper waste management of the substance and/or its container must be determined in accordance with Directive 2008/98/EC
.1. Waste treatment methods
Do not pour into drains or waterways.
Waste :
Waste management is carried out without endangering human health, without harming the environment and,
in particular without risk to water, air, soil, plants or animals.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Do not contaminate the ground or water with waste, do not dispose of waste into the environment.
Soiled packaging :
Empty container completely. Keep label(s) on container. Give to a certified disposal contractor.

Categories Display