Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 695-797-0 | CAS number: 93601-86-6
Guidance on Safe Use
Administrative data
First-aid measures
DESCRIPTION OF FIRST AID MEASURES
Inhalation:
If inhaled, move to fresh air. If not breathing, give artificial respiration and/or oxygen. Get medical attention if symptoms occur.
Skin contact:
Remove contaminated clothing. Flush skin with plenty of soap and water. Get medical attention if symptoms occur.
Eye contact:
Rinse eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention.
Ingestion:
If swallowed, wash out mouth with water. Seek immediate medical attention.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
As a pharmaceutical intermediate, the toxicity and potency of this substance are not fully known. The substance is wetted with a mixture of water and impurity. The impurity affects CNS if inhaled and may cause drowsiness or dizziness. If in eyes irritation may occur.
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
Treat symptomatically and supportively.
Fire-fighting measures
EXTINGUISHING MEDIA
Suitable extinguishing media:
Use water spray, foam, dry powder or carbon dioxide as appropriate for surrounding fire and materials.
Unsuitable extinguishing media:
No limitations given for this substance.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Flammable due to presence of flammable impurity. Forms explosive mixtures with air at ambient temperatures. Vapours are heavier than air and may spread along floors. In case of fire toxic fumes of nitrogen oxides (NOx), carbon monoxide (CO), hydrochloride (HCl) may be emitted.
ADVICE FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental release measures
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
Use recommended personal protective equipment during removal of spillages.
ENVIRONMENTAL PRECAUTIONS
Do not let the substance enter into drains.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
Moisten the spillages prior to sweeping up. Keep in closed suitable container and hold for waste disposal. Ventilate area and wash spill site with water after material pickup is completed.
Handling and storage
PRECAUTIONS FOR SAFE HANDLING
Avoid breathing dust or vapours and contact with eyes and skin. Handle in well-ventilated areas. Use recommended personal protective equipment.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Store at regular indoor conditions, generally 15 to 25°C. Keep container tightly closed.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 1325
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not applicable
Marine transport (UN RTDG/IMDG)
- UN number:
- 1325
Shipping information
- Proper shipping name and description:
- FLAMMABLE SOLID, ORGANIC, N.O.S.
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 1325
Shipping information
- Proper shipping name and description:
- FLAMMABLE SOLID, ORGANIC, N.O.S.
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
CONTROL PARAMETERS
To the best of our knowledge, established occupational exposure limit value is not available for the substance.
For impurity:
Long Term Exposure Limit, LTEL (8 h): 350 mg/m3
Short Term Exposure Limit, STEL (15 min): 600 mg/m3.
EXPOSURE CONTROL
Appropriate engineering controls:
Use appropriate controls (e.g. containment, local exhaust ventilation, fume hood) as specified in a workplace risk assessment. Technical measures and appropriate operations should be given priority over the use of personal protective equipment. Handle in accordance with good industrial hygiene and safety practice.
Personal protective equipment:
- Eye face protection: Use safety goggles. A device for eyewash should be available.
- Skin protection: Handle with impervious gloves. The selected gloves must comply with the specifications in EC Directive 89/686/EEC and the related standard EN374 or applicable federal, state and national legislation.
- Protective clothing: Impervious clothing. The type should be selected according to concentrations and quantities of the hazardous substance handled at the specific workplace. In dust generating operations wear disposable coverall.
- Respiratory protection: Required when vapours and dusts are generated. Choice of respiratory protection should be appropriate to the task and the level of existing engineering controls. Use air-purifying respirator with combination filters for routine powder handling in process scale and positivepressure air-supplied respirator if there is a potential of uncontrolled release. In laboratories, use fume hood or laminar flow booth.
- Environmental exposure controls: Do not empty into drains.
Stability and reactivity
REACTIVITY
No known reactivity hazards under normal conditions.
CHEMICAL STABILITY
The substance is chemically stable at standard ambient conditions (room temperature), generally 15 to 25°C.
POSSIBILITY OF HAZARDOUS REACTIONS AND CONDITIONS TO AVOID
None known.
INCOMPATIBLE MATERIALS
Oxididants. Strong acids and bases.
HAZARDOUS DECOMPOSITION PRODUCTS
Carbon monoxide (CO), nitrogen oxides (NOx) and hydrogen chloride (HCl).
Disposal considerations
WASTE TREATMENT METHODS
Dispose waste at authorized plant, in accordance with Directive 2008/98/EC and/or applicable federal, state, national and local laws.
INFORMATION ON RECYCLING AND METHODS OF DISPOSAL FOR INDUSTRY
Avoid dust generation and inhalation of dust. Avoid contact with eyes and skin. Do not ingest. Wear all recommended personal protective equipment. Wash thoroughly after handling. Dispose waste at authorized plant, in accordance with applicable national, federal, state or local legislation. Disposal could be sent for external waste handling company for incineration. Do not empty into drains or water courses.
INFORMATION ON RECYCLING AND METHODS OF DISPOSAL FOR THE PUBLIC
This substance is not for public use. This is an on-site isolated intermediate and therefore this entry is not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
