Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures-
General information:
In case of persisting adverse effects, consult a physician. Change contaminated, saturated clothing.

After inhalation:
Remove affected person from the immediate area. Ensure supply of fresh air.

After skin contact
Wash off immediately with soap and water.

After eye contact:
Separate eyelids, wash the eyes thoroughly with water (15 min.).

After ingestion:
Seek medical advice immediately. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed-
No data available.

Fire-fighting measures

Extinguishing media-
Suitable extinguishing media:
Foam; Carbon dioxide; Extinguishing powder; Water spray jet

Unsuitable extinguishing media:
No data available.

Special hazards arising from the substance or mixture-
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Nitrous oxides (NOx); Ammonia (NH3); Hydrogen cyanide (HCN); vinyl triazine; Combustion products of this material have to be classed invariably as respiratory poison.

Advice for firefighters-
Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done with breathing apparatus. Wear protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures-
For non-emergency personnel:
Refer to protective measures listed under ‘Handling and Storage’ and ‘Exposure controls/personal protection’. Ensure adequate ventilation. Avoid dust formation. Keep away sources of ignition.
For emergency responders

Personal protective equipment (PPE) - see ‘Exposure controls/personal protection’.

Environmental precautions-
Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up-
Take up mechanically. When picked up, treat material as prescribed under heading "Disposal considerations".

Handling and storage

Precautions for safe handling-
Advice on safe handling:
No special measures necessary if stored and handled as prescribed. Avoid the formation and deposition of dust. Provide good ventilation of working area (local exhaust ventilation, if necessary).

General protective and hygiene measures:
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands before breaks and after work. Provide eye wash fountain in work area. Do not inhale dust.

Advice on protection against fire and explosion:
Dust can form an explosive mixture with air. Take precautionary measures against static charges. Keep away from sources of heat and ignition.

Conditions for safe storage, including any incompatibilities-
Technical measures and storage conditions:
Keep container tightly closed and dry in a cool, well-ventilated place.

Requirements for storage rooms and vessels:
Store product in closed containers.

Advice on storage assembly:
None known

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls-
Appropriate engineering controls:
No data available.

Personal protective equipment-
Respiratory protection:
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn.

Eye / face protection:
Safety glasses (EN 166)

Hand protection:
In case of intensive contact, wear protective gloves (EN 374). Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product. Before use, the protective gloves should be tested in any case for its specific workstation suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.

Appropriate Material: nitrile
Material thickness > 0.3 mm
Breakthrough time > 480 min.

Appropriate Material: rubber
Material thickness: > 0.5mm
Breakthrough time > 240 min.

Normal chemical work clothing.

Environmental exposure controls:
No data available.

Stability and reactivity

Chemical stability-
No data available.

Possibility of hazardous reactions-
No data available.

Conditions to avoid-
None, if handled according to intended use.

Incompatible materials-
Oxidizing agents

Hazardous decomposition products-
Nitrous oxides (NOx); Hydrogen cyanide (HCN); vinyl triazine; Ammonia (NH3); Carbon monoxide and carbon dioxide

Disposal considerations

Waste Treatment methods-
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.

Residuals must be removed from packaging and when emptied completely disposed of in accordance with the regulations for waste removal. Incompletely emptied packaging must be disposed of in the form of disposal specified by the regional disposer.

Categories Display