Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
∙ General information:
Immediately remove any clothing soiled by the product.
Take affected persons out into the fresh air.
Personal protection for the First Aider.
Do not leave affected persons unattended.
∙ After inhalation:
Keep quiet
Remove to fresh air, rest, medical control in case of important inhalation or respiratory disorders.
In case of unconsciousness, lay down and move to recovery position
∙ After skin contact:
Immediately remove any clothing soiled by the product.
Wash skin thoroughly with soap and water and rince thoroughly with water, medical control if persistent irritation or burning.
∙ After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
Protect unharmed eye.
∙ After swallowing: Call for a doctor immediately.

Most important symptoms and effects, both acute and delayed
Chemical, physical and toxicological properties were not fully investigated. Main known symptoms and effects are detailed in classification and labelling section.

Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire-fighting measures

Extinguishing media
∙ Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Adapt extinguishing measures to the environment.
∙ For safety reasons unsuitable extinguishing agents:
Water with full jet

Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
In case of fire, the following can be released:
Carbon monoxide (CO)
In certain circumstances, the presence of trace of other toxic substances cannot be excluded.

Advice for firefighters
∙ Protective equipment:
Wear self-contained respiratory protective device.
Do not inhale explosion gases or combustion gases.
Wear protective suit
Wear mouth respiratory protective device.
∙ Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.
Cool exposed containers to the heat by pulverizing water.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid substance contact.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Ensure supply of fresh air in enclosed rooms.

Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.

Methods and material for containment and cleaning up:
Ensure adequate ventilation.
Do not use sawdust
Dispose of the material collected according to regulations.
Dispose contaminated material as waste according to item 13.

Handling and storage

Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
∙ Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Keep respiratory protective device available.
Emergency cooling must be available in case of nearby fire.

Conditions for safe storage, including any incompatibilities
∙ Storage:
∙ Requirements to be met by storerooms and receptacles: No specific requirements
∙ Information about storage in one common storage facility: Store away from foodstuffs.
∙ Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.

Specific end use(s) No further relevant information available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical facilities: No further data; see item 7.

Control parameters
∙ Ingredients with limit values that require monitoring at the workplace: Not required.
∙ Additional information: The lists valid during the making were used as basis.

Exposure controls
∙ Personal protective equipment:
∙ General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Avoid contact with the eyes and skin.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
∙ Respiratory protection:
If exposition to vapors cannot be avoided, wear gaz mask with ABEK canister following EN 14387 standard or equivalent
∙ Protection of hands:
Protective gloves
The protective gloves to be used must comply with specifications of CE directive 89/686/EEC and the resultant standard EN 374.
Avoid direct contact with the substance with organisation measure.
Control the good condition of the protective glove before each use
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
∙ Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
∙ Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
∙ Eye protection:
Wear goggles
∙ Body protection:
Wear protective work clothes

Stability and reactivity

∙ 10.1 Reactivity No further relevant information available.
∙ 10.2 Chemical stability
∙ Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Do not overheat.
∙ 10.3 Possibility of hazardous reactions No hazardous reaction known.
∙ 10.4 Conditions to avoid: No further relevant information available.
∙ 10.5 Incompatible materials: No further relevant information available.
∙ 10.6 Hazardous decomposition products: No known hazardous decomposition products.

Disposal considerations

Waste treatment methods
∙ Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Hand over to hazardous waste disposers.
Must be specially treated adhering to official regulations.
∙ Uncleaned packaging:
∙ Recommendation: Disposal must be made according to official regulations.