Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures-
General information:
Immediately remove any clothing soiled by the product.
In case of irregular breathing or respiratory arrest provide artificial respiration.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: If symptoms persist consult doctor.
Most important symptoms and effects, both acute and delayed:
Allergic reactions

Fire-fighting measures

Extinguishing media-
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture:
No further relevant information available.
Advice for firefighters:
Protective equipment: No special measures required.
Additional information:
Collect contaminated fire-fighting water separately. It must not enter the sewage system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures-
Remove persons from danger area.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Use neutralising agent.
Dispose contaminated material as waste.
Ensure adequate ventilation.

Handling and storage

Precautions for safe handling-
Thorough dedusting. Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: No special measures required.

Conditions for safe storage, including any incompatibilities-
Storage:
Requirements to be met by storerooms and receptacles:
Store only in the original receptacle.
Store in cool, dry conditions in well-sealed receptacles.

Information about storage in one common storage facility:
Store away from foodstuffs.
Further information about storage conditions:
Protect from frost.
Keep container tightly sealed.
Storage class: 6.1 D

Transport information

Land transport (ADR/RID)

UN number:
UN3082
Proper shipping name and description:
3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (N-(2-(4-amino-Nethyl-
m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Chemical name:
(N-(2-(4-amino-Nethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Language:
English
Class:
9 Miscellaneous dangerous substances and articles.
Packaging group:
III
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN3082
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3082
Proper shipping name and description:
3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (N-(2-(4-amino-Nethyl-
m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Chemical name:
(N-(2-(4-amino-Nethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Class:
9
Packaging group:
III
EmS code:
F-A,S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3082
Proper shipping name and description:
3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (N-(2-(4-amino-Nethyl-
m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Chemical name:
(N-(2-(4-amino-Nethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate)
Class:
9
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters-
Ingredients with limit values that require monitoring at the workplace: Not required.
Additional information: The lists valid during the making were used as basis.

Exposure controls-
Personal protective equipment:
General protective and hygienic measures:
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Do not eat, drink, smoke or sniff while working.
Storing food in the working area is prohibited.
Respiratory protection: Not necessary if room is well-ventilated.
Protection of hands: Protective gloves
Material of gloves-
Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact use
gloves made of the materials: nitrile rubber (thickness ³ 0.38 mm, breakthrough time > 480 min).
Eye protection: Safety glasses
The protective safety glasses to be used must comply with the specifications of the EC directive
89/686/EEC and the resultant standard EN166.
Body protection: Protective work clothing

Stability and reactivity

Reactivity: No further relevant information available.
Chemical stability:
Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: See "Fire Fighting measures".
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.

Disposal considerations

Waste treatment methods-
Recommendation:
Must not be disposed together with household garbage. Do not allow product to reach sewage
system. Contact waste processors for recycling information.
Uncleaned packaging:
Recommendation:
Disposal must be made according to official regulations.
Packaging that may not be cleansed are to be disposed of in the same manner as the product.