Registration Dossier

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
density, other
Remarks:
density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2018-01-03
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Reason / purpose:
reference to same study
Qualifier:
according to
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Version / remarks:
2012
Deviations:
no
Qualifier:
according to
Guideline:
EU Method A.3 (Relative Density)
Version / remarks:
2008
Deviations:
no
Qualifier:
according to
Guideline:
EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
Version / remarks:
2002
Deviations:
no
GLP compliance:
yes (incl. certificate)
Remarks:
signed 2017-02-28
Type of method:
air comparison pycnometer (for solids)
Specific details on test material used for the study:
Storage conditions: Room temperature, dry, tightly closed and away from heat and sources of ignition
Dynamic viscosity of test material:
not applicable - test item is a solid
Type:
density
Density:
1.424 g/cm³
Temp.:
20 °C
Remarks on result:
other: relative density D4/20 = 1.42

Two tests with different amounts of the test item were performed to determine the relative density D420 at a temperature of 20 °C ± 0.01 °C.

Results of the measurement of the density of the test item

Test No. Temperature [°C] Amount of test item [g] Average sample volume [cm³] Density [g/cm³]*
1 20 15.14 6.34684 1.40385
2 20 15.10 6.14216

1.44412

* The pressurizing-expansion cycles are performed until 5 subsequent volume measurements have a relative standard deviation (RSD) of ≤ 0.2 %.

The mean density of the test item at 20 °C is 1.42399 ± 0.02 g/cm³ (RDS = 1.4 %) . The relative density D420 is calculated by dividing the density of the test item by the density of water at 4 °C (0.9999750 g/cm³).

The relative density is       D420 = 1.42.

Conclusions:
According to OECD Test Guideline 109 (2012), Regulation EC No. 440/2008 Method A.3. and OCSPP Test Guideline 830.7300 (2002), the relative density D4/20 of the test item strontium bis 2-ethylhexanoate at 20 °C ± 0.01 °C (compared to water at 4 °C) is D4/20 = 1.42.

Description of key information

According to OECD Test Guideline 109 (2012), Regulation EC No. 440/2008 Method A.3. and OCSPP Test Guideline 830.7300 (2002), the relative density D420 of the test item strontium bis 2-ethylhexanoate at 20 °C ± 0.01 °C (compared to water at 4 °C) is D420 = 1.42.

Key value for chemical safety assessment

Relative density at 20C:
1.42

Additional information