Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General advice: Get medical advice/ attention if you feel unwell.

Remove/Take off immediately all contaminated clothing.

If inhaled: If inhaled, remove to fresh air.

Get medical advice/ attention.

In case of skin contact: In case of contact, immediately flush skin with soap and plenty of water.

In case of eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

If swallowed: If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Most important symptoms and effects, both acute and delayed

Symptoms: irritant effects

Risks: Causes serious eye damage.

Causes skin irritation.

Indication of any immediate medical attention and special treatment needed

Treatment: Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: Water spray jet

Alcohol-resistant foam

Unsuitable extinguishing media: Dry powder

Carbon dioxide (CO2)

High volume water jet

Special hazards arising from the substance or mixture

Specific hazards during firefighting: In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Carbon dioxide (CO2)

Nitrogen oxides (NOx)

Advice for firefighters

Special protective equipment for firefighters: Self-contained breathing apparatus

Further information: Wear suitable protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions: Wear suitable protective equipment.

Ensure adequate ventilation.

Environmental precautions:

The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up

Methods for cleaning up: Pick up mechanically. Rinse away rest with water.

Avoid dust formation.

Take measures to prevent the build up of electrostatic charge.

Risk of dust explosion.

Treat recovered material as described in the section "Disposal considerations".

Handling and storage

Precautions for safe handling

Advice on safe handling: Handle and open container with care.

Avoid dust formation.

Avoid dust accumulation in enclosed space.

Provide adequate ventilation.

Advice on protection against fire and explosion:

Keep away sources of ignition. Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations. Dust can form an explosive mixture in air.

Hygiene measures:

Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions:

Keep containers tightly closed in a cool, well-ventilated place.

Specific end use(s)

Specific use(s): No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Personal protective equipment

Eye protection: Safety glasses

Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

For details, see the BG-rules number 192.

Hand protection

Remarks: Long-term exposure Impervious butyl rubber gloves Minimum thickness (glove): not determined The data about break through time/strength of material is not valid for undissolved solids/dust.

Remarks: For short-term exposure (splash protection): Nitrile rubber gloves. Minimum thickness (glove): not determined The data about break through time/strength of material is not valid for undissolved solids/dust.

Remarks: These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Skin and body protection: Wear suitable protective equipment.

Respiratory protection: Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure

Protective measures: Observe the usual precautions for handling chemicals.

Do not breathe dust.

Avoid contact with skin and eyes.

Stability and reactivity

Reactivity

See section "Possibility of hazardous reactions"

Chemical stability

Stable under normal conditions.

Possibility of hazardous reactions

Hazardous reactions: The substance or mixture does not emit flammable gases in contact with water.

Conditions to avoid: None known.

Incompatible materials

Materials to avoid: Strong acids and oxidizing agents

Hazardous decomposition products

No decomposition if stored and applied as directed.

Disposal considerations

Waste treatment methods

Product:

Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Contaminated packaging:

Packaging that cannot be cleaned should be disposed of as product waste