Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 950-576-0 | CAS number: -
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 17 june 2019 - 04 July 2019
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Version / remarks:
- 2016
- Qualifier:
- according to guideline
- Guideline:
- other: ASTM D7094: “Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester”
- Version / remarks:
- 2012
- Deviations:
- not specified
- Principles of method if other than guideline:
- remark of reviewer:
Although ASTM D7094 (modified continuously closed cup) is not mentioned in the EC A.9 guideline, this method is a commonly used and safer (low sample volume) alternative for the ISO 2719 Pensky-Martens closed cup method. - GLP compliance:
- yes
- Type of method:
- non-equilibrium method closed cup
- Flash point apparatus:
- other: Eraflash (Eralytics, Austria)
- Dynamic viscosity of test material:
- no data
- Specific details on test material used for the study:
- Boiling temperature: 245.8 °C
- Key result
- Flash point:
- 103 °C
- Atm. press.:
- 1 013 hPa
- Interpretation of results:
- other: not classified under CLP or GHS
- Conclusions:
- The flash point of the substance was determined to be 103°C (at 1013 hPa).
- Executive summary:
The flash point of the substance was determined using the modified continuously closed cup ASTM D7094 method (GLP study). The flash point was determined in duplicate obtaining a lowest value of 103°C (at 1013 hPa).
Reference
Test 1: 103°C
Test 2: 105°C
As the difference between the results is ≤ 6°C, the lowest flash point value obtained was reported as the flash point of the substance.
Description of key information
Flash point: 103°C (ASTM D7094: modified continuously closed cup)
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 103 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
