Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Toxicity to aquatic algae and cyanobacteria
Administrative data
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 06 - 23 Apr 2009
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- Due to the nature of the test item, analytical measurement is not possible.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 009
- Report date:
- 2009
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Freshwater Alga and Cyanobacteria, Growth Inhibition Test)
- Version / remarks:
- 2006
- Deviations:
- yes
- Remarks:
- temperature exceeded 23 ±2 °C
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.3 (Algal Inhibition test)
- Qualifier:
- according to guideline
- Guideline:
- other: No.23-Guidance document on aquatic toxicity testing of difflcult substances and mixtures
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- THE DEPARTMENT OF HEALTH OF THE GOVERNMENT OF THE UNITED KlNGDOM, UK GLP Monitoring Authority
Test material
- Reference substance name:
- Vapour grown graphitic carbon fibre
- Molecular formula:
- C
- IUPAC Name:
- Vapour grown graphitic carbon fibre
Constituent 1
Sampling and analysis
- Analytical monitoring:
- no
- Remarks:
- Due to the nature of the test item, analytical measurement is not possible.
Test solutions
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION
- Differential loading: For each nominal concentration the required amount of homogenised sample was added to 500 mL of culture medium in an aspirator. The aspirators were mixed for 48 h at 21 to 23 °C and then allowed to separate for four hours. The aqueous phase, avoiding all settled and floating material, was drawn off and filtered using Whatman No. 1 filter paper. The resultant solution was used as the test exposure solution.
- Controls: test medium without test material
Test organisms
- Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Green algae
- Strain: CCAP 278/4
- Source: Culture Collection of Algae and Protozoa, lnstitute of Freshwater Ecology Windermere Laboratory
- Age of inoculum (at test initiation): Exponential phase
- Method of cultivation: The tests and culture were performed in deionised water with added nutrients. Before use the water was sterilised by autoclaving at 120 °C for 30 min. Sterile nutrient stock solutions were then added and the pH value adjusted to 8.0 ± 0.2 to obtain the culture medium.
ACCLIMATION
- Culturing media and conditions: Temperature: 23 ± 2 °C, Illumination: 6000 - 10000 lux continous white light, Shaking: 200 rpm
Study design
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
Test conditions
- Test temperature:
- 23.3 - 26.5 °C (26.5 °C was measured at test end in test and control treatments)
temperature exceeded 23 ± 2 °C - pH:
- 7.1 - 7.9 (Control)
7.1 - 7.6 (Test item concentrations) - Nominal and measured concentrations:
- Control, 10, 18, 32, 56, 100 mg/L (nominal loading rate)
- Details on test conditions:
- TEST SYSTEM
Test vessel:
- Type: open
- Material, size, headspace, fill volume: 250 mL conical glass flask; 100 mL test solution, 150 mL headspace
- Initial cells density: 1 x 10E+04 cells/mL
- Control end cells density: 141.1 x 10E+04 cells/mL
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 6
GROWTH MEDIUM
- Standard medium used: yes
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: De-ionised,flltered and sterilised by autoclaving at 120 °C for 30 min.
- Culture medium different from test medium: Same medium
- Intervals of water quality measurement: At test start and test end.
OTHER TEST CONDITIONS
- Photoperiod: Continously
- Light intensity and quality: 6000 to 10000 lux white light
EFFECT PARAMETERS MEASURED:
- Determination of cell concentrations: Cell density was determined after 24, 48 and 72 h exposure periods. The cell counts were made using a haemocytometer and microscope. Cells, which showed abnormalities were included in the count but also reported in the observation chapter.
TEST CONCENTRATIONS
- Spacing factor for test concentrations: 1.8
Range finding study
- Test concentrations: Control, 0.1, 1.0, 10 and 100 mg/L
- Results used to determine the conditions for the definitive study: Percent of inhibition by growth rate 4, 3, 3 and 21% at 0.1, 1, 10 and 100 mg/L. - Reference substance (positive control):
- yes
- Remarks:
- Potassium dichromate
Results and discussion
Effect concentrationsopen allclose all
- Duration:
- 72 h
- Dose descriptor:
- EL10
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: not possible to calculate 95% confidence limits
- Duration:
- 72 h
- Dose descriptor:
- EL20
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: not possible to calculate 95% confidence limits
- Duration:
- 72 h
- Dose descriptor:
- EL50
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: not possible to calculate 95% confidence limits
- Duration:
- 72 h
- Dose descriptor:
- NOELR
- Effect conc.:
- 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Details on results:
- - Exponential growth in the control (for algal test): yes
- Observation of abnormalities (for algal test): All cells appeared normal, no cells were observed that showed any morphological abnormalities. - Results with reference substance (positive control):
- - Results with reference substance valid? yes
- EC50 (72 h): 0.84 mg/L for growth rate (historical data: ErC50 (72 h): 0.86 mg/L) - Reported statistics and error estimates:
- The statistical evaluation was caclulated with the program ToxCalcTMVersion 5.0 “Comprehensive Toxicity Data Analysis and Database software.
Any other information on results incl. tables
Biological Results
Table 1: Cell numbers (mean initial cell density: 1 x 10E+04 cells/mL)
Loading rate |
Replicate |
Cell density measurements (cells/mL x 10E+04) |
||
[mg/L] |
24 hours |
48 hours |
72 hours |
|
0 |
1 |
5.0 |
21.3 |
130.7 |
2 |
5.7 |
26.7 |
139.0 |
|
3 |
5.0 |
17.7 |
126.0 |
|
4 |
4.3 |
21.3 |
154.0 |
|
5 |
7.3 |
29.7 |
159.7 |
|
6 |
6.0 |
18.3 |
137.0 |
|
Mean |
5.6 |
22.5 |
141.1 |
|
10 |
1 |
4.3 |
17.0 |
95.0 |
2 |
5.3 |
17.7 |
153.3 |
|
3 |
5.3 |
15.0 |
88.7 |
|
Mean |
5.0 |
16.6 |
112.3 |
|
18 |
1 |
4.0 |
15.3 |
92.7 |
2 |
7.0 |
19.0 |
90.0 |
|
3 |
5.3 |
15.3 |
74.0 |
|
Mean |
5.4 |
16.5 |
85.6 |
|
32 |
1 |
7.7 |
17.0 |
80.7 |
2 |
6.7 |
17.0 |
139.7 |
|
3 |
4.0 |
16.7 |
68.7 |
|
Mean |
6.1 |
16.9 |
96.4 |
|
56 |
1 |
5.3 |
11.0 |
116.3 |
2 |
5.0 |
15.0 |
89.7 |
|
3 |
4.3 |
10.7 |
72.7 |
|
Mean |
4.9 |
12.2 |
92.9 |
|
100 |
1 |
4.0 |
16.0 |
109.0 |
2 |
3.3 |
16.3 |
90.7 |
|
3 |
5.3 |
12.3 |
88.3 |
|
Mean |
4.2 |
14.9 |
96.0 |
Table 2: Inhibition of growth rate
Loading rate |
Percent inhibition by growth rate |
|
[mg/L] |
0 - 48 h |
0 – 72 h |
10 |
9 |
5 |
18 |
10 |
10 |
32 |
9 |
9 |
56 |
20 |
9 |
100 |
13 |
8 |
Table 3: Endpoints ELx and NOELR values by growth rate (based on the nominal loading rate)
Periode of exposure |
ErLx value |
||
[h] |
ErL10 |
ErL20 |
ErL50 |
0 to 48 h |
>100 mg/L* |
>100 mg/L* |
>100 mg/L* |
0 to 72 h |
>100 mg/L* |
>100 mg/L* |
>100 mg/L* |
NOELR |
≥100 mg/L (0 – 72 hours) |
* Not possible to calculate 95% confidence limits
Table 4: Validity criteria
Criterion from the guideline |
Outcome |
Validity criterion fulfilled |
The biomass in the control cultures should have increased exponentially by a factor of at least 16 within the 72-hour test period. |
141 |
Yes |
The mean coefficient of variation for section-by-section specific growth rates (days 0-1, 1-2 and 2-3, for 72-hour tests) in the control cultures must not exceed 35% |
16.78 |
Yes |
The coefficient of variation of average specific growth rates during the whole test period in replicate control cultures must not exceed 7% in tests with Pseudokirchneriella subcapitata and Desmodesmus subspicatus. For other less frequently tested species, the value should not exceed 10%. |
1.94 |
Yes |
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Remarks:
- For further details please refer to “Any other information on results incl. tables”.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
